Nitro Rustler

This is the Traxxas Nitro Rustler 2WD Ready-to-Run Stadium Truck with Traxxas Stability Mangement (TSM), TQi 2.4GHz Radio System, TRX 2.5 racing engine, EZ-Start battery and charger. Now you can have authentic Pro 2WD action in a nitro-powered stadium...

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is a quart of Traxxas Top Fuel 20% Nitro Radio Controlled Car and Truck Engine Fuel. Traxxas Fuels are Perfectly Blended with high quality ingredients to give your Engine Easier Starts, Faster Runs, and longer life.This item ships only to the 48...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible...

This is the Traxxas Super Duty Long Glowplug. FEATURES:Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 enginesSuited for the varied throttle range of off-road racingMedium heat range INCLUDES:One Traxxas Medium Heat Range Super Duty Long...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive. New Phillips and Straight screwdriver bits are precision-ground from the same premium hardened tool steel as Traxxas hex speed...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

This is the Traxxas Speed Bit Master Set Metric 7-Piece Straight and Ball End Hex Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:Premium handle (1/4" drive)Travel pouchStraight Hex Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mmBall End Hex...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Stability Management TSM 2.4GHz Receiver, model 6533. Now you can add TSM to any vehicle being used with a TQi transmitter!Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration...

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and higher), iPhone (4S and newer), iPod touch (5th generation...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a pull-start such as this is a great way to cut some...

This is the Traxxas 1800mAh 7.2V 6-Cell NiMH Battery with Standard Tamiya Plug. This is used in Traxxas EZ-Start Systems with nitro vehicles. This works with the EZ-Start 1 and 2.

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLJatoNitro RustlerNitro SlashRustler 4X4 VXLRustler...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the 2056 servo found in some models.Specifications125 oz-in...

This is the GPM Racing Blue Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball screws18 hollow ball connectorsFits1/10 Monster Jam...

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder. FEATURES:Constructed of...

This is a Traxxas Glow Plug Wire Lead for all Traxxas EZ-Start 1 and 2 equipped vehicles.  It fits the T-Maxx .15, 2.5, 3.3, Revo, Jato, 4-Tec, Rustler, Stampede and all other vehicles equiped with the EZ-Start system.  It...

This is the Traxxas Fuel Line  (2 ft) SpecificationsFuel line (610mm or 2ft)24" fuel line Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-Maxx Accessory Part ForTRX 2.5RTRX 3.3TRX Pro .15

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter.SpecificationsDimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)Weight: 0.35oz (10g)

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides oil for many applications, and is still small enough to...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated construction SPECSOutside diameter:...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck.   For the ultimate in bump and jump control, Traxxas Big Bore shocks...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmFits1/10 E-Revo...