Traxxas E-Maxx Parts List
The Traxxas E-Maxx takes RC monster truck thrashing to another level with its powerful motor system. Available with a 16.8V brushed, or a 22.2V brushless power system for use with up to 6S LiPo, the Traxxas E-Maxx trucks have the potential to deliver endless amounts of fun for kids and adults. The E-Maxx is built to sustain all kinds of terrain. Equipped with sturdy waterproof electronics, you can drive the Traxxas E-Maxx wherever you want! From water and snow to mud and dirt, this monster truck blazes through all conditions without slowing down. Even without any additional E-Maxx 4x4 upgrades, this truck's transmission is able to sustain over 2x more torque than original models!
Want to improve the performance of your truck even more? Shop our wide variety of Traxxas E-Maxx parts to find your desired upgrades. Whether you need replacement batteries, shock kits or new tires, RC Superstore has an extensive supply of Traxxas E-Maxx brushless upgrades! Put in your order today!
-
TRA3950XTraxxas 20-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 20-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The heavy-duty 20-tooth (32-pitch) pinion gear is machined from...$595 -
TRA4933X
Traxxas Hard-Anodized 7075-T6 Aluminum Pivot Balls & Ball Cap Bushings (4)
This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...$20 -
RPM81065
RPM Blue Front Bulkheads for T-Maxx & E-Maxx
This is the RPM Blue Front Bulkhead Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been...$1099 -
TRA3949X
Traxxas 19-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 19-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA5671
Traxxas Geode 3.8" Chrome Wheels w/17mm Splined Hex for use w/Sidewall Protectors
This is a pair of Traxxas Geode 3.8" Chrome Wheels with 17mm Splined Hex for use with Sidewall Protectors.FeaturesNylon constructionBeadlock appearance style, for use with sidewall protectorsChrome in color ...$1195 -
TRA5353A
Traxxas 17mm Splined Green Aluminum Wheel Nuts (4)
These are the Traxxas 17mm Splined Green Aluminum Wheel Nuts for use on 17mm hubs on the 1/10 E-Revo, Revo 3.3, Summit, E-Maxx and T-Maxx trucks.Includes: Four 17mm outer wheel nutsFits trucks below when using 5353G 17mm hubs1/10 E-Revo Brushed1/10...$10 -
TRA4951R
Traxxas Center Driveshaft Set for E-Maxx 3906
This is a set of Traxxas Center Driveshafts for the E-Maxx 14.4V model 3906. These will not fit E-Maxx 16.8V or E-Maxx Brushless trucks. Features: Outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt...$3495 -
TRA5131R
Traxxas Upper Suspension Arms (2): T-Maxx 2.5, 2.5R, 3.3, E-Maxx
These are the Upper Suspension Arms for the T-Maxx 3.3. FEATURES:Fastens to bulkhead and helps to support axle carriersBlack in color, constructed of hardened plastic INCLUDES:One Right and one Left Upper Suspension Arm for the T-Maxx 3...$750 -
TRA3942X
Traxxas 12-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
RPM80332
RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...$229 -
TRA5117
Traxxas Ball Bearings, 6x12x4mm (2)
This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...$4 -
RRP8714
Robinson Hard Steel 14T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 14-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$799 -
TRA2975
Traxxas 4-Amp DC Charger for 7.2-8.4V NiMH iD Batteries
This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 6-7 cell NiMH...$2495 -
TRA5643
Traxxas 17T Pinion Gear 0.8 Mod 32P for 5mm Shaft, with Set Screw
This is the Traxxas 17-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit.FeaturesHardened steel17 tooth0.8 Mod / 32 pitchFits 5mm shaftsIncludesOne...$5 -
TRA4976
Traxxas Wheelie Bar Wheels & Axles: T-Maxx 3.3
These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie bar SPECS:Thickness: 0.39" (10mm)Diameter: 1.02" (26.1mm)$4 -
TRA5189
Traxxas 4x13mm Screw Pins with Threadlock (4)
This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex Head DesignThreadlockIncludes: Four 4mm x 13mm Black...$350 -
TRA2553
Traxxas 3x15mm Countersunk Hex Head Machine Screws (6)
This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2.5Jato 3.3Nitro 4-TecRevo 3.3SlayerSlayer ProT-Maxx 2...$250 -
TRA6538
Traxxas Telemetry Spur Gear Trigger Magnet Holders
These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...$3 -
RRP8724
Robinson Extra Hard 5mm Bore 24T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 24-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$799 -
RPM80165
RPM Shock Tower & Adjustable Body Mount (Blue): T-Maxx 2.5, 3.3, E-Maxx
This is the RPM Blue Shock Tower and Body Mount Set for the Traxxas T-Maxx and E-Maxx trucks. This will mount on either the front or the rear of the truck. Purchase two packages to upgrade both the front and rear. Fits all Traxxas T-Maxx .15, 2.5, 3...$1299 -
TRA2938X
Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers
This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...$12 -
TRA3767P
Traxxas Pink Aluminum Shock Caps (4) for all Ultra Shocks
This is a set of four Traxxas Pink Aluminum Shock Caps for all Ultra Shocks. These fit a wide range of vehicles, including the Bandit, Rustler, Stampede, Slash, E-Maxx, T-Maxx, Bigfoot, Craniac, Skully, and more!Fits1/10 Ford Fiesta ST Rally1/10 Monster...$14 -
HRATD100X06
Hot Racing Aluminum 100mm HD Big Bore Rear Shocks for Slash, Stampede, Rustler
These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other vehicles that can use 100mm shocks. These are also a great...$2888 -
TRA5646
Traxxas 20T Pinion Gear 0.8 Mod 32P for 5mm Shaft, with Set Screw
This is the Traxxas 20-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit.FeaturesHardened steel20 tooth0.8 Mod / 32 pitchFits 5mm shafts IncludesOne...$5 -
TRA2579
Traxxas 3x15mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...$250 -
RPM80152
RPM Black Front & Rear Bulkhead Braces for Traxxas T-Maxx & E-Maxx
This is the RPM Black Front and Rear Bulkhead Brace Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks.RPM T/E-Maxx bulkhead braces support the bulkheads for added strength to both the front & rear of the vehicle. Much of the...$649 -
TRA5118
Traxxas Ball Bearings, 8x16x5mm (2): Revo, E-Maxx, Slayer
This is a pair of Traxxas 8x16x5mm Ball Bearings. These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...$6 -
TRA4611
Traxxas Ball Bearings 5x11x4mm
This is a pair of Traxxas 5x11x4mm ball bearings. These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...$6 -
TRA3952X
Traxxas 22-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 22-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA3915
Traxxas E-Maxx Brushless Clear Body with Decals
This is the Traxxas E-Maxx Brushless Clear Body with Decal Sheet. The body is supplied pre-cut, requiring the paint application.$2495 -
RPM81075
RPM Blue Rear Bulkheads for T-Maxx & E-Maxx
These are the RPM Blue Rear Bulkheads for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with RPM front...$1099 -
TRA5151R
Traxxas Steel Center Driveshaft Set: E-Maxx Brushless & 16.8V Trucks
This is a set of Traxxas E-Maxx Brushless and 16.8V Steel Center CV-Driveshafts with Inner and Outer Dust Boots. These are genuine Traxxas upgrade parts, so you know they will fit perfectly, and they will be made to withstand just about anything you can...$3695 -
TRA2056
Traxxas 2056 High-Torque Waterproof Servo: E-Maxx
This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...$3395 -
TRA2968X
Traxxas LiPo Cell Voltage Checker/Balancer with ID Adapter
This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...$3195 -
TRA5666
Traxxas Blue Beadlock Style Sidewall Protector w/Screws for use with Geode 3.8 Wheels
This is a pair of Traxxas Blue Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Blue Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner Diameter: 3.1" (79mm)Outer Diameter: 3.9" (100mm)Fits...$7 -
RRP8720
Robinson Extra Hard 5mm Bore 20T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 20-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$799 -
TRA3959
Traxxas 62T Spur Gear: E-Maxx
This is the optional .8 Metric Pitch 62 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 62T 0.8 metric pitch spur gear REQUIRES:Installation on the vehicle SPECS:Diameter: 2"...$3 -
TRA5132R
Lower Suspension Arms:T-Maxx 2.5, 2.5R, 3.3
These are the Lower Suspension Arms for the T-Maxx 3.3. FEATURES:Helps to support axle carriers and shocksBlack in color, constructed of hardened plastic INCLUDES:One Right and one Left Lower Suspension Arm for the T-Maxx 3.3 REQUIRES:Fastening to...$750 -
TRA2583
Traxxas 3x18 Button-Head Machine Screws (6): Jato
This is a set of six Traxxas 3mm x 18mm Button-Head Machine Screws for the Jato 2.5 and 3.3 trucks.$250 -
TRA5379R
Traxxas Machined Spiral Cut Differential Ring & Pinion Gears (Front)
This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles.Accessory Part For1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Ford Fiesta ST Rally1/10 Rally1/10...$3995
