1/16 Rally

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right Axle Carrier

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used in any vehicle where this size bearing is...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow Balls Specifications:Length: 67mm (2.6")Diameter: 5mm (0...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm (0.20")

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is the Hot Racing 26-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). This is Traxxas part number 7093Part Number: 7093 / TRA7093Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford...

This is the Traxxas Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks). This is Traxxas part number 7062Part Number: 7062 / TRA7062Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16...

This is the Traxxas Hollow balls (20). This is Traxxas part number 7028Part Number: 7028 / TRA7028Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash...

This is the Traxxas Rebuild kit, center differential (includes o-rings and diff gear covers). This is Traxxas part number 7014XPart Number: 7014X / TRA7014XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16...

This is the Traxxas VXL-3m Brushless Waterproof Electronic Speed Control (ESC). This is a stock replacement for Traxxas 1/16 scale brushless trucks, and it comes pre-wired with the Traxxas high-current connector.This is the stock replacement ESC...

These are the Hot Racing Blue Aluminum 12mm Clamping Hex Hubs for Traxxas 1/16 Vehicles such as the 1/16 E-Revo, Slash 4x4, Rally, and Summit. These will fit the brushed and VXL brushless versions of these cars and trucks.FEATURES:6061-T6 Blue aluminum...

This is the Traxxas Wheel hubs, hex, aluminum (4) (blue-anodized). This is Traxxas part number 7154XPart Number: 7154X / TRA7154XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...

This is the Traxxas Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1). This is Traxxas part number 7077RPart Number: 7077R / TRA7077RFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

This is the Traxxas Rod ends (8)/ hollow balls (8). This is Traxxas part number 7059Part Number: 7059 / TRA7059Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally...

These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the WingTote Short Course Truck and Buggy Tote. The Short Course Truck & Buggy Tote is one best values on the market. Upper Compartment: 24"L x 13.5"W x 4"HLower Compartment: 24"L x 13.5"W x 9"H FeaturesMade with 600 Denier Nylon that is...

This is the Hot Racing Black Aluminum Center Transmission Case for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally vehicles. This will fit the brushed and VXL brushless versions of these trucks.FEATURES:6061-T6 aluminum constructionCNC machinedBlack...

This is the Hot Racing Red Aluminum Shock Upgrade Kit for Traxxas 1/16 GTR Shocks. This includes aluminum shock caps, spring adjusters, and spring retainers. These will replace the plastic cap, spring adjuster and retainer of the factory shocks. This...

This is the Hot Racing Black Aluminum Shock Upgrade Kit for Traxxas 1/16 GTR Shocks. This includes aluminum black shock caps, spring adjusters, and spring retainers. These will replace the plastic cap, spring adjuster and retainer of the factory shocks...

This is the Hot Racing Titanium Pillow Ball Set (4) for Traxxas 1/16 E-Revo, 1/16 Slash, 1/16 Rally, 1/16 Summit, and 1/16 Mustang vehicles. These pivot balls are installed through the upper and lower suspension arms and axle carriers and allow camber...

This is the Hot Racing Hardened Steel Lightweight 53-Tooth Spur Gear for Traxxas 1/16 Vehicles like the 1/16 E-Revo, 1/16 Slash 4x4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon...

This is the Hot Racing Hardened Steel Lightweight 50-Tooth Spur Gear for Traxxas 1/16 Vehicles like the 1/16 E-Revo, 1/16 Slash 4x4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion...

This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

This is the Traxxas Input shaft/ output shaft. This is Traxxas part number 7092Part Number: 7092 / TRA7092Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is the Traxxas Piston, damper (2x0.5mm hole, red) (4)/ travel limiters (4). This is Traxxas part number 7067Part Number: 7067 / TRA7067Fits1/16 E-Revo Brushed1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally...

This is the Traxxas Motor mount, finned aluminum. This is Traxxas part number 7060Part Number: 7060 / TRA7060Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally...

This is the Traxxas Rebuild kit, steel constant-velocity driveshafts (includes pins, o-rings, stub axles for driveshafts assemblies). This is Traxxas part number 7055Part Number: 7055 / TRA7055Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford...

This is the Traxxas Steel Constant Velocity Driveshaft Set for the 1/16 Slash 4x4 and 1/16 Rally VXL vehicles.  This includes all four driveshafts and axles.Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower...

This is the Traxxas Aluminum caps, pivot ball (threaded aluminum, hard-anodized with PTFE-coating) (8)/ hex wrench, 5mm. This is Traxxas part number 7033XPart Number: 7033X / TRA7033XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16...

This is the Traxxas Seal kit, receiver box (includes o-ring, seals, and silicone grease). This is Traxxas part number 7025Part Number: 7025 / TRA7025Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave...

This is the Traxxas Box, receiver (sealed)/ wire cover/ foam pads, upper & lower/ silicone grease/ 2.5x8 CS (4)/ 3x4 GS (1). This is Traxxas part number 7024XPart Number: 7024X / TRA7024XFits1/16 E-Revo Brushed1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4). This is Traxxas part number 7021Part Number: 7021 / TRA7021Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16...

This is a set of Traxxas 2.5x12mm Countersunk Hex Head Machine Screws (6 pack). These are used in many of the 1/16 scale Traxxas vehicles.SpecificationsLength: 12mmWidth: 2.5mmFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

This is set of Traxxas 2.5x10mm Countersunk Machine Screws with Hex Heads (6 pack). These are used in many of the Traxxas 1/16 scale vehicles.SpecificationsLength: 10mmDiameter: 2.5mmFits:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16...

This is the Traxxas Servo Case and Gasket Set for 2080 Micro Waterproof Servos.The 2080 servo has been used in vehicle such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...

These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit Vehicles.  These fit the brushed and VXL brushless versions.FEATURESSteel constructed axles ...

These are the Wheel Hubs and Axle Pins for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FEATURESNylon constructionBlack in colorINCLUDESFour Wheel HubsFour 1.5x8mm Axle PinsREQUIRESInstallation on the...