Telluride

This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. This is Traxxas part number 1664. These are used in a large number of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacMonster JamNitro RustlerNitro...

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo 2.5, 3.3, T-Maxx 3.3, and E-Maxx 16.8V Trucks. FEATURES:Repairs damaged slipper clutches INCLUDES:(1) Spring(2) Nuts(1) Pin(1) Metal Plate(3) Pads(2) WashersInstruction...

This is the GPM Racing Silver Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six 3x6mm...

These are the Traxxas Blue Aluminum Left and Right Castor Blocks for the Traxxas 1/10 Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and XO-1 vehicles.This unique C-Hub design is already Traxxas Tough; this artfully machined aluminum version is stronger...

This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for...

This is the GPM Racing Red Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They look...

These are the GPM Racing Black Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option to...

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 10mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...

This is a Traxxas Shock Piston Head Set (2 sets of 3 types) with shock collars and lower spring retainers.Includes:2 - Lower spring retainers2 - Upper spring clamps2 each - Plastic 1 hole pistons, 2 hole pistons, and 3 hole pistons2 - 2.5mm x 9mm machine...

This is the Traxxas Complete Rear Differential for 1/10 4x4 Slash, Hoss, Stampede, Rustler, and Rally.  This complete, pre-assembled diff is a great part to quickly repair a damaged driveline, and a great spare part to have on hand too. Stock...

This is the Traxxas Complete Front Differential for 1/10 4x4 Slash, Hoss, Stampede, Rustler, and Rally.  This complete, pre-assembled diff is a great part to quickly repair a damaged driveline, and a great spare part to have on hand too. Stock...

This is the GPM Racing Orange Aluminum Steering Bellcrank and Servo Saver for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and Telluride trucks. These are made of 6061-T6 aluminum for strength and durability. They look great, and...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Stock Replacement On1/10 Monster Jam TrucksSkullyAccessory Part For1/10 Monster Jam TrucksCraniacNitro StampedeRustler VXLRustler XL-5Slash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash...

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles.Includes:One Rear Differential Ring GearOne Rear Differential Pinion Gear

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

This is the Traxxas Front Black Long Ultra Shocks complete with Spring Pre-load Spacers and Springs (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The complete front set features two pre-assembled...

This is the GPM Racing Black Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...

This is a pair of Traxxas Green Rear Springs for XXL Rear Ultra Shocks on trucks such as the Rustler, Slash 2WD, and Stampede.Stock Replacement On1/10 Monster Jam TrucksSkullyAccessory Part For1/10 Monster Jam TrucksCraniacNitro StampedeRustler...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 6-7 cell NiMH...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. These are used on many vehicles, including the Bandit, Rustler, Slash 2WD, Slash 4x4, Hoss, Stampede 2WD, and Stampede 4x4. Traxxas oil-filled Ultra...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted Off-Road Racing Tires, Satin Chrome WheelsFoam...

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie bar SPECS:Thickness: 0.39" (10mm)Diameter:  1.02" (26.1mm)

This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES:Steel construction INCLUDES:16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES:Installing on motor shaft SPECS:Number of Teeth: 16TPitch: 48Inner Diameter: 0.12" (3mm)

This is the GPM Racing Black Aluminum Steering Bellcrank and Servo Saver for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and Telluride trucks. These are made of 6061-T6 aluminum for strength and durability. They look great, and...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider GearsOne Spider Gear ShaftOne Carrier Support

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is a set of four Traxxas Pink Aluminum Shock Caps for all Ultra Shocks. These fit a wide range of vehicles, including the Bandit, Rustler, Stampede, Slash, E-Maxx, T-Maxx, Bigfoot, Craniac, Skully, and more!Fits1/10 Ford Fiesta ST Rally1/10 Monster...

These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other vehicles that can use 100mm shocks. These are also a great...

This is the Traxxas Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, BFGoodrich® Mud-Terrain™ T/A® KM2 tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated). This is Traxxas part number 6873Part...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is a pair of Traxxas 8x16x5mm Ball Bearings.  These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas FEATURES Machined aluminum construction Anodized blue in color INCLUDESTwo Aluminum Rear Stub Axle CarriersTwo 3x3mm Set ScrewsTwo 3x12mm Flat Phillips Head ScrewsTwo 3x31.5mm...

These are the Pro-Line Pro-Spec SC Assembled Rear Short Course Truck Shocks (2). These are a bolt-on upgrade for the rear of vehicles like the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Rustler 2WD & 4x4, and Bandit.The next...

This is the GPM Racing Silver Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...

This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...