Nitro Sport

This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush washers (2).For use with TRX 2.5 & 3.3 engines used...

This is a set of the Traxxas Slash telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks. Includes: (6) sets of drive shafts (each set consists of an inside shaft wich slides in the outside...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas FEATURES Machined aluminum construction Anodized blue in color INCLUDESTwo Aluminum Rear Stub Axle CarriersTwo 3x3mm Set ScrewsTwo 3x12mm Flat Phillips Head ScrewsTwo 3x31.5mm...

This is a pair of Traxxas 5x11x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...

This is the GPM Racing Red Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash...

This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...

This is the GPM Racing Blue Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the RPM Red Wide Front Bumper for Rustler, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL brushless trucks. This replaces Traxxas part TRA2735.Give your...

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3...

This is the GPM Racing Red Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made...

This is the GPM Racing Green Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is a pair of Traxxas 2555 Rear Suspension Arms. These are used on many vehicles, such as the Slash 2WD, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.Fits:Nitro RustlerNitro SlashNitro SportNitro StampedeSlash 2WD XL-5Slash 2WD Ford...

This is the Traxxas Pink Front Bumper for Stampede 2WD, Rustler, Bandit, and several other vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5SkullyStampede VXL...

This is the RPM Red Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized Black in color-...

This is the GPM Racing Orange Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum X-Long Shocks without Springs. These can be used as upgrade shocks for the rear of a wide range of Traxxas vehicles, listed below.Fits:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit...

This is a set of four Traxxas Green Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

This is a pair of Traxxas Terra-Spiked Tires for 2.2" wheels. These were stock on the Sledgehammer, but can be used on other vehicles with standard 2.2" truck wheels.FeaturesHard-traction rubber-type materialAlso features a tractor type tread with...

This is the Traxxas TRX .12 and .15 Engine Stock Replacement One-Way Bearing.  This bearing is located on the starter shaft. FeaturesSteel constructionRoller bearing design IncludesOne One-Way Bearing RequiresNothing.  This is a direct...

This is the GPM Racing Gunmetal Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.

This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware).  Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm.These fit the Traxxas Big Bore aluminum shocks for the Slash 2WD, Slash 4x4, Rustler, Bandit, Stampede 2WD,...

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

This is the GPM Racing Orange Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the GPM Racing Black Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the RPM Green Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

These are Shock Caps and Bottoms for Traxxas kits. Features: Nylon construction Includes:Two nylon shock cap (tops)Two nylon shock cap (bottoms) Specifications:Diameter:Tops: 16mmBottoms: 13mm

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts.For use with:1/10 Monster Jam Trucks1/10 RallyCraniacE-MaxxE-Maxx BrushlessNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...