Traxxas Nitro Slash
How much power do you want out on the track? If you’re craving more torque and speed, then you owe it to yourself to look into the Traxxas Nitro Slash. It delivers not only raw energy but also durability.
At RC Superstore, we’ve seen plenty of different types of models come and go over the years. However, the Traxxas Nitro Slash has staying power because of its rugged design and excellent parts availability. The vehicle even includes the Traxxas-exclusive electrical starting system that you’re not going to find anywhere else.
Traxxas Nitro Slash Ready-to-Run Trucks
Assume for a moment that you were just getting ready to break into higher-end modeling. If that were the case, then you might be interested in looking at the two-wheel-drive version of the Traxxas Nitro Slash especially because it comes in a truck form factor that’s fitted with RTR parts.
In fact, you might not want to waste much time looking over all of the other options on the market because this could very well be your vehicle.
Since it comes with TSM, the famous Traxxas Stability Management system, you can trust that it will tear up the track in any short course arena. It offers a sophisticated TQi 2.4 GHz radio adapter and even comes with an EZ-Start battery and charger.
While you might be perfectly happy with the way the TSM technology works out of the box, you can fine-tune it for an even more custom experience.
Traxxas Stability Management
TSM gear makes it possible to handle extreme power and speed without losing anything in the way of control. Driving a scale truck model on slippery surfaces like loose dirt and smooth concrete is really difficult. The TSM receiver makes this much easier.
All you need to do is punch it off the line and the equipment takes care of the rest for you. You should see dramatic improvements in braking in particular since the TSM module will work to keep your truck nice and straight until it comes to a complete stop. Some drivers even take advantage of this fact so they can make corrections and then hit the throttle hard as they head into turns. It can really help you pick up some great exit speed.
The advanced EZ Start 2will even alert you to when you’re up against problems, like if a glow plug has failed. That being said, Traxxas’ engineers have spent so much time designing reliable equipment you might be surprised how much it holds up against.
Finding the Nitro RC Truck that’s Right for You
With so many different styles on the market, you might be unsure of which is best for your particular driving or modeling style. If that’s the case, then just contact us online and talk with our experienced experts. They’ll be sure to help you get exactly the vehicle you need to really rip up the track the next time you’re out on any short course.
Best of all, you should be able to enjoy the great performance on many different types of surfaces with a Slash.
-
TRA5211R
Traxxas One Way Bearing for the 2.5 and 3.3
This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull starter FEATURES:Steel construction INCLUDES:One roller...$2250 -
TRA2669
Traxxas Big Bore Shock Piston Head Set & Mounting Bushings
This is the Traxxas Big Bore Shock Piston Head Set with Mounting Bushings. This set includes two 2-hole pistons, two 3-hole pistons, two shock mounting bushings, and two washers.Includes2- Pistons (2-hole)2- Pistons (3-hole)2- Shock Mounting Bushings2-...$250 -
TRA2362
Traxxas Shock Rebuild Kit (2): T-Maxx & E-Maxx Shocks
This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams$250 -
TRA1747P
Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4)
These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16...$750 -
TRA2743
Traxxas 3mm Hardened Set / Grub Screws (12)
This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...$3 -
RPM80372
RPM Black Front Bearing Carrier Steering Block Traxxas 2WD
These are the RPM Black Front Bearing Carriers / Steering Blocks for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, Skully, Craniac, and Bigfoot trucks. These replace Traxxas 3736 steering blocks, and require using...$669 -
TRA2532
Traxxas Fiberglass Tie Bar: Nitro Rustler, Stampede, Bandit
This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. FEATURES Fiberglass...$4 -
GPM-SSLA1277RHA-B
GPM Blue Stainless Steel & Aluminum Rear CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede & 2WD Slash
This is the GPM Racing Blue Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...$3690 -
TRA3431
Traxxas Straight Tip Body Scissors
This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...$895 -
TRA3182
Traxxas Collars with Set Screws (2)
These are the Traxxas Collars with Set Screws. These come in packages of two.Includes:(2) screw collars(2) 3mm set screws Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeNitro...$250 -
TRA2640
Traxxas Chrome Suspension pins, 44M (2) w/E-Clips
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. 31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel...$250 -
TRA3762A
Traxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more.Fits:Bandit XL-5 & VXLRustler XL-5 & VXLStampede...$18 -
TRA3636A
Traxxas Aluminum Front Steering Blocks (Blue): Stampede, Rustler, Slash, Bandit
These are the optional Traxxas Aluminum Steering Blocks for the Rustler, Stampede and Bandit. FEATURES:Aluminum constructionAnodized blue in color INCLUDES:One Left and Right Alloy Steering BlockFour 5x11mm Metal Bearings REQUIRES:Installation into...$2995 -
TRA1914R
Traxxas Front & Rear Body Mount: Slash, Stampede, Rustler
This is the Front and Rear Body Mount Set for the Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. This includes front and rear body mounts with 6.5mm, 25mm, 38mm, and 52mm body post extensions FEATURES Nylon constructionBlack in...$6 -
TRA3631
Traxxas Front Suspension Arms: Stampede 2WD, Rustler, Slash
This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede 2WD and Rustler. FEATURES:Made from black molded nylon for the Traxxas Stampede 2WD and Rustler. SPECS:Length: 3 1/4"Thickness: 3/8"Width at end near chassis: 1 1/2"Width at...$8 -
TRA5246
Traxxas T-Maxx 2.5/3.3 Pipe Coupler
This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452 INCLUDES:One pipe coupler REQUIRES:Installing on the vehicle with wire...$175 -
TRA3632G
Traxxas Green Aluminum 30-Degree Castor Blocks for 2WD Stampede, Slash, Rustler, Nitro Slash
This is a pair of Traxxas Green 6061-T6 Aluminum 30-Degree Castor Blocks with vertical suspension screw pins. These high-quality aluminum castor blocks are strong, precise, and look great! These fit Slash 2WD, Stampede 2WD, Skully, Craniac, Rustler,...$1995 -
GPM-SSLA1278FRPP-OC
GPM Joint Rebuild Kit for SSLA1277RH & SSLA1280FH CVD Driveshaft Sets
This is the GPM Joint Rebuild Kit for SSLA1277RH & SSLA1280FH CVD Steel Driveshaft Sets. Each pack rebuilds two joints. Includes Steel Pin 2x11.7 - 2pcsSpring Coil - 2pcsBlack Collar - 2pcs$250 -
GPM-SSLA1277RHP-OC
GPM Replacement Screw Pins for SSLA1277 & SSLA1280 CVD Driveshaft Sets
These are GPM Replacement Screw Pins for SSLA1277 & SSLA1280 CVD Driveshaft Sets. Each pack includes two screw pins.$150 -
GPM-SSLA1277A/JT-OC
GPM Stainless Steel Replacement Stub Axle & CVD for SSLA1277RHA Driveshafts
This is a GPM Stainless Steel Replacement Stub Axle and CVD for SSLA1277RHA Driveshafts. *Joint replacement for GPM Racing #SSLA1277RHA only IncludesJoint - 1pcHex - 1pc3x3 Screw Shaft - 1pc$4 -
GPM-SLA2W056-R
GPM Red Aluminum Rear Suspension Arms for 2WD Slash
These are the GPM Racing Red Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede. Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...$2490 -
GPM-SLA2W056-OR
GPM Orange Aluminum Rear Suspension Arms for 2WD Slash
These are the GPM Racing Orange Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede. Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability...$2490 -
GPM-SLA2W056-GS
GPM Gunmetal Aluminum Rear Suspension Arms for 2WD Slash
These are the GPM Racing Gunmetal Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede. Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability...$2490 -
GPM-SLA2W056-G
GPM Green Aluminum Rear Suspension Arms for 2WD Slash
These are the GPM Racing Green Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede. Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...$2490 -
GPM-SLA2W056-BK
GPM Black Aluminum Rear Suspension Arms for 2WD Slash
These are the GPM Racing Black Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede. Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...$2490 -
GPM-SLA2W056-B
GPM Blue Aluminum Rear Suspension Arms for 2WD Slash
These are the GPM Racing Blue Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede. Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...$2490 -
TRA3935A
Traxxas Black 90-Degree Body Mounting Clips (10)
This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips). The angled design helps make it easier to remove and install them from the body posts. These can be used as clips on numerous vehicles for the body and other places...$3 -
TRA1664
Traxxas Long Steel Shock Shafts w/Chrome Finish (2)
This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. This is Traxxas part number 1664. These are used in a large number of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacMonster JamNitro RustlerNitro...$3 -
TRA4122
22T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 22-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the higher your top speed. The lower...$12 -
TRA4118
18T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 18-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the higher your top speed. The lower...$12 -
TRA2053
Traxxas Servo Gear Set for 2055 & 2056 Servos
This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.$4 -
TRA2662
Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear)
This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for...$2695 -
GPM-RUS021-G
GPM Green Aluminum Steering Blocks fits 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Green Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These are...$1590 -
TRA6850X
Traxxas Internal & External Splined Half Shafts & U-Joints
This is the Traxxas Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4). This is Traxxas part number 6850XPart Number: 6850X / TRA6850XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...$8 -
TRA2530A
Traxxas Front Bulkhead (Grey): Nitro & Electric Rustler & Stampede, Slash
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES:Gray nylon construction INCLUDES:One front bulkhead REQUIRES:Nothing. This is a direct replacement...$6 -
GPM-SSLA1277RHA-G
GPM Green Stainless Steel & Aluminum Rear CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede & 2WD Slash
This is the GPM Racing Green Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...$3690 -
TRA2055
Traxxas 2055 High-Torque 80 oz/in Steering Servo
This is the Traxxas 2055 High-Torque Servo. This has 80 oz/in of torque, making it an excellent steering servo. This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you would like to mount this in...$2495 -
GPM-CRA332F-OR
GPM Orange Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-CRA021-R
GPM Red Aluminum Steering Blocks for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Red Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10...$1399 -
TRA5857P
Traxxas Slash 2WD Pink Front Progressive Rate Springs (2)
This is a pair of Traxxas Pink Front Progressive Rate Springs for the Slash 2WD trucks.FitsNitro SlashSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5$5