Nitro 4-Tec

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Includes 6 set screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitJato 2.5Jato 3.3Nitro 4-TecNitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayDrag SlashFactory Five...

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set ScrewFits1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacE-MaxxE-Maxx BrushlessNitro...

This is a set of four Traxxas Red Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

This is a set of four Traxxas Orange Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

These durable Traxxas 2.0 mesh wheels for the Nitro 4-Tec fit all popular on-road touring sedans. They come with superb pre-glued racing tires with contoured molded foam inserts. Their lower profile increases sidewall strength and contact patch. The...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the WingTote Short Course Truck and Buggy Tote. The Short Course Truck & Buggy Tote is one best values on the market. Upper Compartment: 24"L x 13.5"W x 4"HLower Compartment: 24"L x 13.5"W x 9"H FeaturesMade with 600 Denier Nylon that is...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory Part For1/10 Ford Fiesta ST Rally1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacDCB M41...

This is the Traxxas Telemetry Expander and GPS Module 2.0 Combo Set.  Upgrade your Traxxas vehicle with this set for precision telemetry data with easy setup. This set must be used with Traxxas TQi radio systems and the #6533 TSM receiver. Expanded...

This is the Traxxas Telemetry GPS Module 2.0.  For real-time, ultra-precise speed data, the GPS Module 2.0 is the answer. Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM...

This is the Traxxas Telemetry Expander 2.0.  Compatible with TQi transmitters and vehicles equipped with a 6533 TSM receiver, the Telemetry Expander 2.0 is a the best option for advanced data communication. Expanded InnovationTraxxas telemetry...

This is the Traxxas Mount, telemetry expander (fits Funny Car, Nitro 4-Tec). This is Traxxas part number 6558Part Number: 6558 / TRA6558FitsFunny CarNitro 4-TecMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is the Traxxas TRX 2.5 & 3.3 Low-Speed Needle with 2x1mm O-rings (2). This works in Traxxas 2.5 and 3.3 engines.For use with TRX 2.5 & 3.3 engines used in:Nitro 4-TecNitro RustlerNitro SlashJato 2.5 & 3.3Revo 2.5 & 3.3T-Maxx 2.5 & 3.3

This is a set of replacement Traxxas Engine Ball Bearings for the TRX 3.3, 2.5R, and 2.5 Engines. This includes one 7x17x5mm and one 12x21x5mm engine bearing. These engines have been used in many of the Traxxas nitro vehicles.SpecificationsFront...

This is the Traxxas 2071 Servo Case Set for the 2070 digital servo.This has been used in vehicles such as:Bandit VXLNitro 4-TecRustler VXLStampede VXL 2WDT-Maxx 3.3

This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH

This is the Wing Tote 1/8 Scale Monster Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks.   FeaturesMade with 600 Denier...

This is the Wing Tote 1/8 & 1/10 scale Car/Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks. FeaturesMade with 600 Denier...

This is the optional Traxxas Resonator Dyno-Tuned Performance Pipe for the Jato FEATURES:The Traxxas Resonator aluminum tuned pipe for Jato is specifically engineered to fit right in the chassis and complement the Jato'sTRX 0.15 racing engine.The...

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit. PACKAGE INCLUDES:2-Bearings SPECS:5x8x2.5mm FEATURES:The bearing are constructed of stainless steel

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0.716") COMMENTS:If the oneway bearing is needed, use...

This is the replacement Recoil String for use with the Traxxas 2.5/2.5R recoil starters. FEATURES:Direct replacementNylon construction INCLUDES:One replacement recoil starter string REQUIRES:Remainder of recoil SPECS:Length:21.5"(546.10mm) COMMENTS:This...

This is a set of Cylinder Head Gaskets for the Traxxas TRX 2.5 engine. FEATURES:Copper construction.Three different thickness allow you to taylor your compression. INCLUDES:One each of the following thickness of gaskets: 0.15", 0.25" & 0.35"...

This is the Traxxas Air Filter Housing for the T-Maxx 2.5. This attaches to the throat of the carburetor. FEATURES:Black plastic air filter housing with cover screen and changeable elementRubber angled neck for filterRubber adapter for filterZip tie...

This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 and 3.3 engines. FEATURES:Carb body constructed of composite material, inlet plug is aluminum, and O-rings are rubber INCLUDES:One Carburetor Body, Fuel Inlet Plug, and...