Jato 3.3

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitJato 2.5Jato 3.3Revo 3.3Rustler VXLSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5Slash 4x4Slash 4x4...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitBandit VXLFunny CarJato 2.5Jato 3.3Revo 3...

This is a set of Traxxas Jato 2.5, 3.3, and Slash Rod Ends and Hollow Balls. There are 12 rod ends and 12 hollow balls included.

This is a set of Traxxas Jato 2.5 andThese are the Left and Right Gearbox Halves for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Left Gearbox HalfOne Right Gearbox Half REQUIRES:Assembly onto Vehicle

This is a Traxxas Jato 2.5 and 3.3 Roll Hoop and EZ Start Plug Mount.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned High RPM Performance Pipe for the Jato 2.5 and 3.3 trucks.  This will also work on the Nitro Rustler and Nitro 4-Tec from Traxxas.  These provide a significant power increase...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.

This is a pair of RPM Black Rear Suspension A-Arms for the Traxxas Jato 2.5 and 3.3 trucks. These are very strong, and they include a lifetime warranty through RPM against breakage. If you break one under normal use, just send it in for a free...

This is a pair of RPM Blue Black Suspension A-Arms for the Traxxas Jato 2.5 and 3.3 trucks. These are very strong, and they include a lifetime warranty through RPM against breakage. If you break one under normal use, just send it in to RPM for a free...

This is the Team Integy 58-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks. This is MUCH stronger than a plastic spur gear. The Integy spur gears feature color-coded rings to allow easy identification. Going to a smaller...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie BarSpecificationsOuter Diameter: 1.1" (29mm)Inner...

This is a set of Traxxas Jato 2.5 and 3.3 Front and Rear Aluminum Suspension Tie Bars.

This is a Traxxas Jato 2.5 and 3.3 Left and Right Half Shaft Set.  These come completely assembled and have rubber sealed boots.  These are used on the rear of the truck and attach to the diff output yokes.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Rear Shock Tower.

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is the Hot Racing Aluminum 54T Slipper Spur Gear (0.8 metric pitch, compatible with 32-pitch) Features CNC machined 6061-T6 aluminum Direct fit replacement for vehicles with slipper clutch transmissions Hard anodized with light gunmetal...

This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*. This item is a replacement for Traxxas 5556.*For high...

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is the optional Variable Damping Kit for GTR Shocks found on the Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR. FEATURES Nylon construction Enhances tuning ability of suspension by controlling compression and rebound rate of...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the Brake Disc for the Traxxas Nitro Jato Stadium Truck. FEATURES:Composite constructionGrey in color INCLUDES:One Composite Brake Disc REQUIRES:Assembly onto Vehicle

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models.

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel construction- Black oxide coating for durability and...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is the Traxxas Countersunk Hex Screw 3x8mm

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm) zip ties REQUIRES:Installing between tuned pipe and...

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the GPM Racing Gunmetal Front Turnbuckle Camber Links for Traxxas 1/10 Slash 4x4 VXL, Rustler 4x4 VXL, Stampede 4x4 VXL, and Jato 3.3 trucks. These feature aluminum rod ends with a steel turnbuckle link for adjustability and strength.These are...