Track/Field & Transport

This is the RPM Pit-Pro Extreme Car Stand for 1/10 and 1/8 Scale vehicles. Car stands have been around for a long time, with minimal innovation or ingenuity. That changes NOW! The all-new RPM Pit-Pro Extreme Car Stand is a completely new and unique stand...

This is the RPM Precision Camber Gauge. One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after time that even the most experienced drivers cannot set their camber by “eye”. With our Camber...

This is the RPM Toe-In Gauge. Our Toe-In gauge allows you to do track-side checks of the toe-in without removing the wheels! Our gauge checks toe through the simple method of comparing the distance between the wheels at the rear of the tire to the...

This is the RPM Bearing Blaster Bearing Cleaning Tool. Blast away debris from your bearings with the RPM Bearing Blaster! RPM has incorporated a simple two-piece design to simplify difficult bearing cleaning tasks. The Bearing Blaster has an open, flow...

This is the RPM Shock Duplicator Matching Tool for up to 6 1/4" (158mm) Long Shocks using 4-40 or 3mm mounting screws. This covers most 1/8, 1/10, and down to 1/16 scale shocks.How do you know if your shocks are built correctly? Do you “eyeball” the...

This is the RPM Black Pinion Gear Carrying Case. These will hold up to 15 pinion gearsRPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a...

This is the RPM Mega Bearing Blaster for Bearings up to 1.25" (32mm) outside diameter, and 3/16" (5mm) inside diameter. The RPM Mega Bearing Blaster takes up where our original Bearing Blaster leaves off. The Mega Bearing Blaster can handle bearing...