Telluride

This is the GPM Racing Orange Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...

This is the GPM Racing Orange Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm.These fit the Traxxas Big Bore aluminum shocks for the Slash 2WD, Slash 4x4, Rustler, Bandit, Stampede 2WD,...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)

This is the GPM Racing Black Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included...

These are the Traxxas Tires & wheels, assembled, glued (SCT chrome, red beadlock style wheels, BFGoodrich Mud-Terrain T/A KM2 tires, foam inserts) (2)(4WD front/rear, 2WD rear only). This is Traxxas part number 5867Part Number: 5867 / TRA5867FitsNitro...

This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie BarSpecificationsOuter Diameter: 1.1" (29mm)Inner...

These are the Traxxas 3x23mm Buttonhead Hex Machine Screws. Each package includes six screws.Fits1/10 RallyBandit VXLRustler VXLSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 4x4Stampede 4x4 VXLStampede 4x4 XL-5Stampede VXL 2WDTelluride

These are Shock Caps and Bottoms for Traxxas kits. Features: Nylon construction Includes:Two nylon shock cap (tops)Two nylon shock cap (bottoms) Specifications:Diameter:Tops: 16mmBottoms: 13mm

This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential components  

This is the GPM Racing Green Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...

This is the GPM Racing Green Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They look...

This is the GPM Racing Red Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included 3x6x3...

This is the GPM Racing Orange Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included...

This is the Traxxas Plate, motor, 6061-T6 aluminum (blue-anodized). This is Traxxas part number 6890XPart Number: 6890X / TRA6890XFitsSlash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail...

This is the Traxxas Sealed Waterproof Receiver Box with Hardware. This fits vehicles such as the Slash 4x4, Stampede, Bandit, Rustler, Telluride, and Spartan boats.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head ScrewsTwo 3x10mm...

These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts.For use with:1/10 Monster Jam Trucks1/10 RallyCraniacE-MaxxE-Maxx BrushlessNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

These are the GPM Orange Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement for...

These are the Traxxas Green Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part For1/10 Monster Jam TrucksCraniacSkullyStampede 4x4...

This is the Traxxas Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft). This is Traxxas part number 6883Part Number: 6883 / TRA6883Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4...

This is the Traxxas Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2' outer, 3.0' inner) (4WD front/rear, 2WD rear only) (2). This is Traxxas part number 6872Part Number: 6872 / TRA6872FitsNitro SlashSlash 2WDSlash 2WD Ford...

This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler XL-5SkullySlash 4x4 (standard...

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne front bulkhead REQUIRESInstallation on chassis

This is the Traxxas Center Differential Housing for the Slash 4x4 and 1/10 Rally vehicles equipped with a center differential. It's a direct replacement for the Slash 4x4 Platinum, and also works on Slash 4x4 and Rally vehicles running the center diff...

This is a Traxxas 19T 48P Pinion Gear. FEATURES:Metal constructionGrey in color INCLUDES:One 19T 48P Pinion GearOne Set Screw REQUIRES:Installation

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is the Traxxas Springs, front (white) (progressive rate) (2). This is Traxxas part number 6857Part Number: 6857 / TRA6857Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4 VXLStampede 4x4...

These are the GPM Racing Orange Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option...

These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass kingpin bushings for smooth steering- Laser etched...

This is the RPM Blue Wide Front Bumper for Traxxas Stampede 4x4 and Telluride trucks. The Traxxas Stampede 4x4 and Telluride are cool trucks with lots of great features built in, but it’s missing a critical piece - heavy-duty front-end protection. Not...

This is the stock replacement Rear Bulkhead for the Traxxas Slash 4x4.FEATURESHardened plastic constructionBlack in colorINCLUDESOne rear bulkheadREQUIRES: Installation on Slash

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Compatible With1/10 Ford Fiesta ST Rally1/10 RallyRustler 4x4 VXLSlash 4x4 Brushed XL-5Slash 4x4 VXL...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -10% Rate, Green (2) Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -10% Rate, Green (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

These are the Steering Blocks for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESTwo steering blocks REQUIRESInstallation on steering assembly SPECSLength: 35mm (1.38")Width: 32mm (1.26")

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Traxxas Springs, rear (white) (progressive rate) (2). This is Traxxas part number 6858Part Number: 6858 / TRA6858Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4 VXLStampede 4x4...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

These are the GPM Racing Black Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for...