Slayer Pro 4x4

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball...

This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...

These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit XL-5CraniacFunny CarRevo 3.3Rustler XL-5SkullySlayerSlayer...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is a Traxxas Steering Servo Guard Set.  These protect your steering servos If you crack or break these, you should always fix them.  Without fixing them you risk damaging your servos.   Replacement PartE-Revo VXL BrushlessRevoSlayer...

This is the Traxxas Transmission Input Slipper Shaft for the Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is a set of Traxxas Revo Assembled GTR Anodized Shocks (4).  The GTR shocks work well with all versions of the Revo, including the 2.5, 3.3, E-Revo brushed & brushless, and the Slayer trucks.  These are an excellent way to upgrade your...

This is the Traxxas Aluminum Hollow Ball Set for the Revo 3.3, 1/10 E-Revo, 1/10 Summit, Jato, and Slayer trucks. Every ounce matters! Save weight with these aluminum upgrades!Features Aluminum ConstructionGun Metal Grey in ColorIncludes30x Tall Centered...

This is the Traxxas 15-Tooth 1.0 Mod Clutch bell with 5x8x0.5mm Fiber Washer and 5mm E-Clip. This clutch bell requires using 5x11x4mm ball bearings.FeaturesVented clutch bellOne piece bell designIncludes15 tooth black vented clutch bell5x8x0.5mm fiber...

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...

These are the Traxxas 4x20mm Button-Head Hex Drive Machine Screws. Each package includes six screws.Fits:SlayerSlayer Pro

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitBandit...

This is the Traxxas Bellcrank Bushing set for the Nitro Rustler, T-Maxx .15, 2.5, 3.3, Slayer, and other vehicles.

These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color INCLUDES:Two long steering servo hornsTwo short steering servo hornsTwo 3x20mm turnbuckles REQUIRES:Installation on the vehicle

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four Hex Wheel HubsFour 2.5 x 10mm Axle...

This is the Fuel Tank Rebuilt Kit for the REVO from Traxxas. FEATURES:Rubber, slicone, plastic, & nylon construction INCLUDES:Mounting post (1)Grommets (2)Tank gaurd (1)Mounting clips (2)O-ring for cap (1)Pull ring for cap (1)Mounting screws (4)

This is the Clutch Bell with Washer and E-Clip for the Traxxas Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo e-clip REQUIRES:This clutch bell uses 5X11 bearings...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm button head screwsFits1/10 E-Revo Brushed1/10 E-Revo...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinstalled Includes:Front bulkhead halves(2) rocker shafts(4) 4X14mm button head screws

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the GPM Racing Orange Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Includes 6 set screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitJato 2.5Jato 3.3Nitro 4-TecNitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Telemetry Expander Mount 6556 for the XO-1, E-Revo*, Summit*, T-Maxx, E-Maxx, Revo 3.3, and Slayer Pro trucks. This part makes it possible to mount the #6550 Telemetry Expander Module on these vehicles.*NOTE: The E-Revo and Summit...

These are the Traxxas Steel Rocker Arm Posts for the Revo and Slayer vehicles. Features: Black steel construction Includes: Two Rocker Arm Posts Specifications:Length: 1.3" (32.8mm)Diameter: 0.20" (5mm) unthreaded portion, 0.23" (5.9mm) threaded portion

These are the Center Half Shafts for the Traxxas Revo 3.3. FEATURES:Constructed of hardened plasticFor front and rear driveshafts INCLUDES:Two external splined shaftsTwo internal splined shafts REQUIRES:Installing between yokes on each drive shaft...

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating INCLUDES:Two Red 2.6 Springs for the Traxxas GTR Shocks used on the...

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:Six Rod EndsSix Pivot...

This is a Traxxas Revo 2.5 and 3.3 Steering Servo Mount Set.  This includes two sets of servo mounts.

This is the GPM Racing Orange Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

This is the GPM Racing Black Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

These are the Traxxas Transmission Gearbox Halves for Revo 3.3 and Slayer trucks. This includes the rubber access plug.IncludesFront and rear gearbox halvesRubber access plugFitsRevo 3.3SlayerSlayer Pro

This is the Traxxas Primary Clutch Assembly with Pins for Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Throttle Servo Mount with Mounting Screws for the Revo 3.3, Slayer, and Slayer Pro trucks.Fits:Revo 3.3SlayerSlayer Pro

This is the Traxxas Aluminum Exhaust Header for the Revo and Slayer. Features: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange Specifications:Length: 59mm (2...