Telluride

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is the GPM Racing Green Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included...

These are the RPM Green Long Rod Ends (12) for 1/10 Traxxas vehicles. These are direct replacements for TRA5525 rod ends.RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash...

This is the GPM Racing Gunmetal Aluminum Steering Bellcrank and Servo Saver for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and Telluride trucks. These are made of 6061-T6 aluminum for strength and durability. They look great, and...

This is the GPM Racing Red Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...

These are the GPM Racing Orange Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and anodized for a spectacular finish, these are a great way...

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 6mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...

These are the Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges- Laser etched lettering- Replaces factory stock plastic...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws

This is the optional Sway Bar Kit for the Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally vehicles. FEATURES For front and rear application to reduce chassis roll in turns and add stability INCLUDESTwo thick and two thin swaybars, two mounts, two...

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne left caster blockOne right caster block REQUIRESInstallation on Slash SPECSLength: 49mm (1.93")Width: 29.5mm (1.16")

This is a set of six Traxxas 3mm x 18mm Button-Head Machine Screws for the Jato 2.5 and 3.3 trucks.

This is the GPM Racing Gunmetal Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The...

These are the GPM Racing Red Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for smooth...

This is a pair of Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires on Black Wheels with Satin Chrome Beadlock-Look. These can be used on the rear of 2WD trucks, or the front and rear of 4x4 trucks. The wheels have a 12mm hex.Stock Replacement OnSlash 2WD...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles.Accessory Part For1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Ford Fiesta ST Rally1/10 Rally1/10...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitJato 2.5Jato 3.3Revo 3.3Rustler VXLSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5Slash 4x4Slash 4x4...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

This is the Suspension Pin Set for the Traxxas Slash 4X4.  The hinge pins hold the suspension arms to the bulkheads.FEATURESDurable steel constructionSilver in colorINCLUDESFour 51.5mm pins ...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 26 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...

This gear is a brass pinion gear in 48 pitch Features:Brass pinion gear Includes:1 gear and 1 set screw Specs:Brass, 48 pitch, 18 tooth pinion gear.Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16"Shaft diameter- 1/4"  Gear...

These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized Black in color-...

This is the Traxxas Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4). This is Traxxas part number 6854XPart Number: 6854X / TRA6854XFits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4...

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitBandit VXLFunny CarJato 2.5Jato 3.3Revo 3...

These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

These are the Rear Red Assembled Tires and Wheels from Traxxas FEATURES Rubber construction, SCT off-road design 5 spoke satin chrome wheels Red beadlock Dual profile INCLUDESTwo Rear Assembled Tires and Wheels with Red Beadlock REQUIRESInstallation...

This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx Brushless, Slayer Pro, Summit, and more. FEATURES: Aluminum...

This is a set of Traxxas Jato 2.5, 3.3, and Slash Rod Ends and Hollow Balls. There are 12 rod ends and 12 hollow balls included.

This is the Traxxas Driveshaft, center, 6061-T6 aluminum (blue-anodized). This is Traxxas part number 6755Part Number: 6755 / TRA6755FitsStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail coming soon! Please check your vehicle manual to confirm...

This is the GPM Racing Gunmetal Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum X-Long Shocks without Springs. These can be used as upgrade shocks for the rear of a wide range of Traxxas vehicles, listed below.Fits:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit...

This is a set of four Traxxas Green Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

These are the GPM Racing Blue Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option to...

This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is included...

This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

These are the Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter-...

These are the Traxxas Button Head 3x40mm Screws (6). Features: Metal construction Black in color Includes: Six 3x40mm buttonhead hex machine screws