Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
HRATE890H
Hot Racing 90T 48P Aluminum Spur Gear for Traxxas Stampede 2WD
This is the Hot Racing 90-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...$1988 -
HRASTE250
Hot Racing Hardened Steel 50T 0.8 Mod 32P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 50-Tooth 0.8 Mod 32-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This gear is significantly smaller than stock, which will increase top speed over stock. It will...$1988 -
RPM70832
RPM Black Rear Bumper for Traxxas Stampede 2WD
This is the RPM Black Rear Bumper for the Traxxas Stampede 2WD electric trucks. This fits XL-5 and VXL versions, as well as the Bigfoot and Skully versions. Bigfoot #1 may require removal of stock bumper on body.Finally, a rear bumper for the Traxxas...$949 -
HRATE883H
Hot Racing 83T 48P Aluminum Spur Gear for Traxxas 2WD Slash, Stampede, Rustler, Bandit
This is the Hot Racing 83-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...$1988 -
HRATD105X06
Hot Racing Aluminum 105mm HD Big Bore Rear Shocks for Slash, Stampede, Rustler
These are the Hot Racing Aluminum 105mm HD Big Bore Shocks. These can be used on the rear of Traxxas Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, and many other vehicles using 105mm shocks. These can be great for scale and rock crawler builds as well...$2888 -
TRA2578
Traxxas Buttonhead Screws 3x12mm (6)
These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12")$250 -
TRA3660
Traxxas Bigfoot #1 Clear Replacement Body
This is the Traxxas Bigfoot #1 Officially-Licensed Replacement Body with window masks and decal sheet. The body is supplied clear as shown, ready for your choice of paint color.The chrome grill and body accessories are sold separately, part numbers...$3495 -
TRA2548
Traxxas 4x12mm Countersunk Machine Screws (100-degree) (6)
This is a pack of Traxxas 4x12mm Countersunk Machine Screws (100-degree). Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacRustler XL-5SkullyStampede XL-5 2WD$150 -
TRA1633
Traxxas E Clips, C Rings: Universal
This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.$2 -
TRA4725
Traxxas 25T Pinion Gear (48 Pitch) w/Set Screw
This gear is a steel pinion gear in 48 pitch Features:Brass pinion gear Includes:1 gear and 1 set screw Specs:Steel, 48 pitch, 25 tooth pinion gear.Shaft length- 3/16" Gear length- 1/4" Overall length- 7/16"Shaft diameter- 1/4" Gear...$3 -
TRA3725X
Traxxas Battery Expansion Kit: Rustler, Stampede 2WD
This is the Battery Expansion Kit for the Traxxas Rustler and Stampede 2WD, and Monster Jam trucks. It will fit both the XL-5 brushed and VXL brushless models. The package includes hardware to raise the electronic speed control mount and battery posts...$6 -
GPM-CRA038GC-OR
GPM Orange Aluminum Transmission Cover for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1999 -
TRA3757P
Traxxas Pink Rear Springs (2) for Stampede, Slash, Rustler, XXL Ultra Shocks
This is a pair of Traxxas Pink Rear Springs for Stampede, Slash 2WD, Rustler, and many other vehicles. These fit the Traxxas XX-Long Ultra Shocks.Fits1/10 Monster Jam TrucksCraniacNitro SlashNitro StampedeRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD...$4 -
TRA2336X
Traxxas Aluminum 61mm Turnbuckle Toe Links (Red): Stampede VXL, XL-5
These are the Traxxas Red Aluminum Turnbuckles with rod ends for the 1/10 Stampede XL-5 and VXL 2WD trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to your Traxxas model. These turnbuckles come in an amazing...$12 -
TRA3641A
Traxxas Front & Rear Camber Link Set: Rustler, Stampede
These are Traxxas Non-Adjustable Front and Rear Camber Links for the Rustler and Stampede XL editions. Features: Gray plastic construction Includes: Two short links, Two long links Specifications:ShortLength: 77 mm (3.03")Width: 9 mm...$3 -
TRA2388X
Traxxas Planetary Gear Diff w/ Steel Ring Gear: VXL
This is the Complete Planetary Gear Differential With Steel Ring Gear for the Traxxas Bandit, Stampede and Rustler. FEATURES:Metal gear shaftsMetal and plastic main differential INCLUDES:Main differential with steel ring gearPlanetary gears and shaftsSun...$15 -
MIP18140
MIP X-Duty Rear CVD Drive Kit for Slash/Stampede 4x4, Stampede/Rustler VXL
This is the MIP X-Duty Rear CVD Drive Kit for the 1/10 Slash 4x4, Stampede 4x4, Rally VXL, Stampede VXL 2WD and Rustler VXL 2WD, Nitro Stampede, and Nitro Rustler.Includes2 - MIP Confetti Sticker, 2.185 x .65 Black1 - MIP Lube & Thread Gel Cup1 - MIP...$72 -
RPM81265
RPM Blue HD Camber Links for Stampede 2WD & Rustler
This is the RPM Blue Heavy Duty Camber Link Set for Traxxas electric Rustler, Stampede 2WD, Skully, Craniac, and Bigfoot trucks. These are direct replacements for the molded links on the XL-5 versions of these trucks. These replace Traxxas 3641 and...$449 -
HRATRX15GS
Hot Racing Carbon Fiber Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...$788 -
RPM73272
RPM ESC Cage for Sidewinder 3 for Slash 2WD, 4x4, Stampede, Rally, Rustler, Bandit
This is the RPM Black ESC Cage for Castle Sidewinder 3 and Sidewinder SCT ESCs. The RPM ESC Cage fits in the stock location on the Traxxas Slash 2WD, Slash 2WD LCG, Slash 4x4, Slash 4x4 LCG, Stampede 4x4, Rustler VXL, Bandit VXL, and 1/10 Rally, while...$749 -
TRA3776A
Traxxas Front Black Chrome All-Star Wheels w/Anaconda Tires: Stampede, Rustler
This is a pair of the Traxxas Nitro Rear/Electric Front All Star Wheels and Anaconda Tires. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam inserts INCLUDES:One left and one right all-star wheels with anaconda...$2995 -
TRA2669
Traxxas Big Bore Shock Piston Head Set & Mounting Bushings
This is the Traxxas Big Bore Shock Piston Head Set with Mounting Bushings. This set includes two 2-hole pistons, two 3-hole pistons, two shock mounting bushings, and two washers.Includes2- Pistons (2-hole)2- Pistons (3-hole)2- Shock Mounting Bushings2-...$250 -
TRA3696
Traxxas 30-Tooth Steel Idler Gear
This is a Traxxas 30-Tooth Steel Idler Gear. This works on many Traxxas vehicles. Features: Steel construction Includes: One steel 30T idler gear$3 -
TRA1951
Traxxas Long Truck Half-Shafts: Rustler, Stampede, Slash
This is a set of Traxxas Long Truck Half-Shafts for the Rustler, Stampede, and Slash 2WD vehicles. Includes:2 white nylon telescoping shaft (each shaft is made of two pieces)4 aluminum U-joints$6 -
TRA2362
Traxxas Shock Rebuild Kit (2): T-Maxx & E-Maxx Shocks
This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams$250 -
TRA1747P
Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4)
These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16...$750 -
HRATE48G01
Hot Racing Aluminum & Carbon Steering Bellcrank for 2WD Slash, Rustler, Bandit
This is the Hot Racing Aluminum and Carbon Fiber Steering Bellcrank for Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless vehicles. It replaces Traxxas part 3743.FEATURES:- CNC machined 6061...$1988 -
TRA2743
Traxxas 3mm Hardened Set / Grub Screws (12)
This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...$3 -
RPM80402
RPM Black Shock Shaft Guards for Traxxas Slash 2WD, 4x4, Rally, Stampede, Rustler, Bandit
These are the RPM Black Shock Shaft Guards for the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede, Rustler, Bandit, and 1/10 Rally vehicles. These do not fit vehicles using GTR shocks, so they will not work on Slash 4x4 Ultimate trucks.Rocks, dirt and...$849 -
RPM80372
RPM Black Front Bearing Carrier Steering Block Traxxas 2WD
These are the RPM Black Front Bearing Carriers / Steering Blocks for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, Skully, Craniac, and Bigfoot trucks. These replace Traxxas 3736 steering blocks, and require using...$669 -
TRA2532
Traxxas Fiberglass Tie Bar: Nitro Rustler, Stampede, Bandit
This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. FEATURES Fiberglass...$4 -
TRA2423
Traxxas 48P Pinion Gear w/Set Screw: 23T
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES:Pinion gear with set screw, Silver in color INCLUDES:(1) 23 Tooth 48 Pitch Pinion Gear(1) One 4mmx2mm set screw REQUIRES:Installation SPECS:Outer Diameter: 14mm (9/16")Inner Diameter: 11mm...$3 -
TRA3431
Traxxas Straight Tip Body Scissors
This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...$895 -
TRA2640
Traxxas Chrome Suspension pins, 44M (2) w/E-Clips
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. 31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel...$250 -
TRA3762A
Traxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more.Fits:Bandit XL-5 & VXLRustler XL-5 & VXLStampede...$18 -
TRA3636A
Traxxas Aluminum Front Steering Blocks (Blue): Stampede, Rustler, Slash, Bandit
These are the optional Traxxas Aluminum Steering Blocks for the Rustler, Stampede and Bandit. FEATURES:Aluminum constructionAnodized blue in color INCLUDES:One Left and Right Alloy Steering BlockFour 5x11mm Metal Bearings REQUIRES:Installation into...$2995 -
RPM80529
RPM Red Gear Cover for 1/10 Traxxas 2WD Slash Stampede Rustler Bandit
This is the RPM Red Transmission Gear Cover for 1/10 Traxxas Slash 2WD XL-5 & VXL, Stampede 2WD XL-5 & VXL, Rustler XL-5 & VXL, and Bandit XL-5 & VXL buggies. This replaces Traxxas gear cover #3792. These covers are not recommended for use with spur...$499 -
HRASTE876
Hot Racing Hardened Steel 76T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Hardened Steel 76-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...$1988 -
TRA3649
Traxxas Stampede Hawaiian Painted Body
This is the Traxxas Stampede Hawaiian Painted Body. This comes pre-painted, trimmed, and ready for installation! These are a direct fit for Stampede XL-5 2WD, 4x4, and Stampede VXL 2WD and 4x4 trucks. Throw a shiny new body on your truck to bring back...$3995 -
TRA1914R
Traxxas Front & Rear Body Mount: Slash, Stampede, Rustler
This is the Front and Rear Body Mount Set for the Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. This includes front and rear body mounts with 6.5mm, 25mm, 38mm, and 52mm body post extensions FEATURES Nylon constructionBlack in...$6