Nitro Sport

This is the Traxxas Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler. This gear is located in the transmission. Features: White nylon construction Steel shaft Includes:One 20 tooth idler gearOne idler gear shaft Specifications:Gear outer...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum Long Shocks without Springs. These can be used as upgrade shocks for the front of a wide range of Traxxas vehicles, listed below.Fits:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit...

These are the Traxxas 2760 Blue Aluminum Shock Caps. Each package includes two shock caps. These are for use with Traxxas 4760 and 4761 aluminum shocks.Fits these vehicles when running Traxxas 4760 and 4761 shocks:1/10 Monster Jam Trucks1/10...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This are Rod Ends Short for the Nitro T-Maxx.  These rods ends attach to turnbuckles for front/rear. FEATURES:Black nylon rod endsSteel pivot balls INCLUDES:Six nylon rod endsSix pivot balls REQUIRES:Turnbuckles: TRA2338 SPECS:Length: .695" (17...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is a Traxxas Hard Chrome Suspension Pin Set with E-clips. These are used on the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:2 - 24X3mm pins4 - 31.5X3mm pins2 - 40X3mm pins2 - 48X3mm pins10 - 3mm e-clips

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...

This is a pair of Traxxas 78mm Turnbuckles.These can be used on:1/10 Monster Jam TrucksCraniacNitro SportRustler XL-5SkullyStampede XL-5 2WD

This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel patternUses 12mm hex adapterINCLUDES: Two Rear Chrome Wheels

This is the Traxxas Nitro Sport Upper Chassis Deck. Replacement Part ForNitro Sport

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. FEATURES: Fits the REAR of the nitro Stampede and Rustler and the FRONT of the electric Stampede and Rustler 2.8" All Star black chrome wheels Talon tires with...

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the Hot Racing Aluminum 90mm Heavy Duty Big Bore Shocks (2pcs) 90mm big bore threaded body aluminum shocks for many 1/10th scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to: Traxxas Bandit front, Nitro...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts.For use with:1/10 Monster Jam Trucks1/10 RallyCraniacE-MaxxE-Maxx BrushlessNitro RustlerNitro SlashNitro SportNitro...

This is a pair of Traxxas Front White Springs. These fit the front long Ultra Shocks (3760A) on many Traxxas vehicles.Fits:Bandit VXLBandit XL-5Nitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5Slash 2WD VXLSlash 2WD XL-5

These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47 mm (1.85")Thread: 3mm (0.118") Fits1/10 Monster Jam...

This is the RPM Black Front Shock Tower for the Traxxas Nitro Slash, Nitro Rustler, and Nitro Sport trucks.RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great...

This is a pair of Talon Tires from Traxxas for use with the Jato. FEATURES:Talon lug designRubber constructionFoam tire insert INCLUDES:Two Talon 2.8" tiresTwo foam inserts REQUIRES:Jato wheels (TRA5574)Tire Glue, DTXR2002 SPECS:Outer Diameter: 4.6"...

This is a pair of Traxxas 2.2" Rear Lite Truck Wheels (white) for the Jato trucks, as well as the electric Rustler and electric Stampede.  These are 2.2-inches in diameter, have a 12mm hex, and require 2.2" tires. ...

This is a set of four Traxxas Red Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

These are the Traxxas X-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...

This is a set of four Traxxas Orange Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

These are the Traxxas Stainless Steel Suspension Hinge Pins with E-Clips. This set fits the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:48mm Rear inner hinge pin (2)31.5mm Front and rear outer hinge pin (4)39mm Front...

This is a pair of Traxxas All-Star 2.8" Black Chrome Wheels for use on the front of 2WD electric trucks, front and rear of electric 4x4, and the rear of nitro 2WD trucks.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Includes: Two...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the GPM Racing Black Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is a pair of RPM Black Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the front...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory Part For1/10 Ford Fiesta ST Rally1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacDCB M41...

This is the GPM Racing Gunmetal Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735...

This is the RPM Pink Wide Front Bumper for Rustler 2WD, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL brushless trucks. This replaces Traxxas part TRA2735.Give...

This is the Hot Racing Black Aluminum 1.5-Degree Rear Hubs / Stub Axle Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized...