Traxxas E-Revo Brushless Truck, Parts & Upgrades
If you're looking for more power from your RC truck, the Traxxas E-Revo is a perfect choice. The E-Revo's brushless motor delivers high torque and amazing horsepower in a durable package, so you can run at speeds of 65+ MPH when running 3S LiPo batteries. Switching to brushless power means more power, less maintenance and longer lifespan due to the reduced amount of wear on the motor.
Looking E-Revo 2.0 VXL trucks & parts? Visit the E-Revo 2.0 page.
We carry the ready-to-run Traxxas E-Revo monster truck as well as a variety of LiPo batteries and chargers to boost your performance even more. If you're already running the E-Revo, check out our complete selection of replacement parts and the upgrades you'll need to take this rugged truck to another level. Find premium wheels, shock springs, replacement gears and more, all at affordable prices.
-
TRA2553Traxxas 3x15mm Countersunk Hex Head Machine Screws (6)
This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2.5Jato 3.3Nitro 4-TecRevo 3.3SlayerSlayer ProT-Maxx 2...$250 -
TRA6538
Traxxas Telemetry Spur Gear Trigger Magnet Holders
These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...$3 -
RRP8724
Robinson Extra Hard 5mm Bore 24T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 24-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$799 -
TRA2938X
Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers
This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...$12 -
GPM-ER2330R-B
GPM Aluminum Rear Bumper w/D-Rings for E-Revo 2.0 (Blue)
This is the GPM Racing Blue Aluminum Rear Bumper with D-Rings for the Traxxas 1/10 E-Revo 2.0 VXL, Revo 3.3 nitro, as well as previous generation 1/10 E-Revo trucks. Whether you're building a realistic monster truck or the ultimate off-road basher,...$2890 -
GPM-ER2027R-G
GPM Green Aluminum 90T P2 Rear Rocker Arm Set for E-Revo & E-Revo 2.0
This is the GPM Racing Green 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy...$2199 -
TRA2579
Traxxas 3x15mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...$250 -
TRA5118
Traxxas Ball Bearings, 8x16x5mm (2): Revo, E-Maxx, Slayer
This is a pair of Traxxas 8x16x5mm Ball Bearings. These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...$6 -
TRA4611
Traxxas Ball Bearings 5x11x4mm
This is a pair of Traxxas 5x11x4mm ball bearings. These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...$6 -
GPM-ER2330R-G
GPM Aluminum Rear Bumper w/D-Rings for E-Revo 2.0 (Green)
This is the GPM Racing Green Aluminum Rear Bumper with D-Rings for the Traxxas 1/10 E-Revo 2.0 VXL, Revo 3.3 nitro, as well as previous generation 1/10 E-Revo trucks. Whether you're building a realistic monster truck or the ultimate off-road basher,...$2890 -
TRA3952X
Traxxas 22-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 22-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA2056
Traxxas 2056 High-Torque Waterproof Servo: E-Maxx
This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...$3395 -
TRA5445
GTR Shock Spring (6.4 Rate Purple) Revo
This is a pair of 6.4 rate (purple) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small purple square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...$6 -
GPM-ER216025S-B
GPM Blue Aluminum 25T Spline Servo Horns w/Adjustable Stainless Steel Links for E-Revo & Summit
These are the the GPM Racing Blue Aluminum 25T Spline Servo Horns with Adjustable Stainless Steel Links for the Traxxas 1/10 E-Revo 2.0 VXL Brushless, 1/10 E-Revo Brushed & Brushless, and the 1/10 Summit trucks. Made of 6061-T6 aluminum and anodized for...$1599 -
TRA2968X
Traxxas LiPo Cell Voltage Checker/Balancer with ID Adapter
This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...$3195 -
TRA5666
Traxxas Blue Beadlock Style Sidewall Protector w/Screws for use with Geode 3.8 Wheels
This is a pair of Traxxas Blue Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Blue Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner Diameter: 3.1" (79mm)Outer Diameter: 3.9" (100mm)Fits...$7 -
TRA2576
Traxxas Buttonhead Screws 3x8mm (6)
These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws$250 -
RRP8720
Robinson Extra Hard 5mm Bore 20T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 20-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$799 -
TRA5465
Traxxas GTR Shock Cap & Spring Retainers: Revo, Slayer
These are the replacement GTR Shock Retainers for the Traxxas Nitro Revo Monster Truck. FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Black Nylon GTR Shock CapsTwo Black Nylon GTR Spring AdjustersTwo Black Nylon GTR Spring RetainersTwo Black...$5 -
TRA3959
Traxxas 62T Spur Gear: E-Maxx
This is the optional .8 Metric Pitch 62 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 62T 0.8 metric pitch spur gear REQUIRES:Installation on the vehicle SPECS:Diameter: 2"...$3 -
TRA5379R
Traxxas Machined Spiral Cut Differential Ring & Pinion Gears (Front)
This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles.Accessory Part For1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Ford Fiesta ST Rally1/10 Rally1/10...$3995 -
TRA3937
Traxxas 4x12mm Button-Head Hex Machine Screws (6)
This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitJato 2.5Jato 3.3Revo 3.3Rustler VXLSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5Slash 4x4Slash 4x4...$250 -
TRA2577
Traxxas 3x10mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...$250 -
TRA2552
Traxxas Hex Drive Screws, 3x12mm (6): Revo, Slayer
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...$250 -
TRA5347
Traxxas Large Rod Ends w/Hollow Balls (12): Revo
This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks. There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...$9 -
GPM-ER216025S-BK
GPM Black Aluminum 25T Spline Servo Horns w/Adjustable Stainless Steel Links for E-Revo & Summit
These are the the GPM Racing Black Aluminum 25T Spline Servo Horns with Adjustable Stainless Steel Links for the Traxxas 1/10 E-Revo 2.0 VXL Brushless, 1/10 E-Revo Brushed & Brushless, and the 1/10 Summit trucks. Made of 6061-T6 aluminum and anodized...$1599 -
GPM-ER2031-G
GPM Green Aluminum Rear Body Post Mount for E-Revo 2.0, Revo 3.3, Slayer, Summit
This is the GPM Racing Green Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...$2999 -
RRP8712
Robinson Steel 12T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 12-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$799 -
TRA2580
Traxxas 3x20mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 SummitBandit VXLFunny CarJato 2.5Jato 3.3Revo 3...$250 -
TRA5120
Traxxas Ball Bearings, 12x18x4mm (2)
These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...$8 -
TRA5624
Traxxas Sealed Receiver Box: Slash, E-Revo
This is the Receiver Box for the Traxxas Slash and E-Revo Trucks. FEATURES:Replaces damaged receiver boxesConstructed of black plastic INCLUDES:One top and bottom half receiver box for the Traxxas SlashHardware REQUIRES:Installing receiver and bolting...$12 -
TRA5353
Traxxas Blue Anodized Wheel Nuts,17mm (4): Revo, T-Maxx 3.3, E-Maxx Brushless
This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx Brushless, Slayer Pro, Summit, and more. FEATURES: Aluminum...$10 -
TRA2065
Traxxas Sub-Micro Waterproof Servo: E-Maxx
This is the Sub Micro Servo included in the Two Speed Conversion Kit (TRAC4000) used on the Traxxas E-Maxx. FEATURES:Sub micro size, waterproof construction Actuates the Internal Shift Fork (TRAC3906) with the push of abutton from a 3-channel...$2795 -
TRA5370
Traxxas Revo 3.8" Talon Tires & Inserts for 3.8" Wheels
This is a set of two Traxxas Talon Tires and foam inserts for the Traxxas Revo and T-Maxx 3.3 rims (3.8"). These tires will fit all of the 3.8" wheels from Traxxas. They feature soft compound treaded rubber and...$2595 -
TRA5319X
Traxxas Revo 2.5 & 3.3 Aluminum Pushrods (Red)
This is a Traxxas Revo Red Aluminum Pushrod Set (2 rods) with rod ends for use with Progressive 3 Rockers (part TRA5359). The pushrods are 112mm in length. These pushrods are strong, and look awesome installed. If you would like to...$1250 -
GPM-ER2027F-G
GPM Green Aluminum 90T P2 Front Rocker Arm Set for E-Revo & E-Revo 2.0
This is the GPM Racing Green 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...$2199 -
HRACSG1219
Hot Racing 19-Tooth 32P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 19-Tooth 32-Pitch Hardened Steel 1/8 Bore Pinion Gear. This can be used on vehicles like the Traxxas E-Maxx, E-Maxx Brushless, 1/10 E-Revo, Slash 4x4, Funny Car, as well trucks like the Tamiya Clodbuster. FEATURES: CNC Machined...$688 -
TRA2074
Traxxas Servo Case & Gaskets for 2056 & 2075 Servos
This is the Traxxas 2074 Servo Case and Gasket Set for 2056 and 2075 Waterproof Servos. Replacement Part For 4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOTBlastChevrolet Corvette StingrayDrag SlashE-Revo VXL BrushlessFactory Five...$6 -
TRA2064
Traxxas 2064 Gear Set for 2065 Waterproof Sub-Micro Servo
This is the Traxxas 2064 Gear Set for the 2065 waterproof sub-micro servo.The 2065 servo has been used in vehicles such as:1/10 E-Revo1/10 SummitE-Maxx 16.8V & BrushlessLaTrax RallyLaTrax TetonLaTrax SSTRevo 3.3$4 -
TRA5334R
Traxxas Axle Carriers for Revo, E-Revo, E-Maxx, T-Maxx, Summit, Slayer
This is a pair of Traxxas Axle Carriers for Revo 3.3, E-Revo, E-Maxx, T-Maxx, Summit, Slayer. These are for use with 6x13mm ball bearings, or use the included bearing adapters to run 6x12mm ball bearings.Includes:One Left Axle CarrierOne Right Axle...$10
