1/16 Summit

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is the 500K Weight Differential Oil from Traxxas FEATURES Lubricates differential Clear in color 500K weight INCLUDESOne .70oz (20cc) Bottle Of 500K Diff Lube REQUIRESApplication to differential

This is a pair of Traxxas 1/16 Geode Black Beadlock-Look Wheels with Canyon AT Tires. This pair comes with the tires pre-glued to the rims with foam inserts installed. The wheels have a 12mm hex.Accessory Part for1/16 Summit

This is the Hot Racing Blue Aluminum Shock Upgrade Kit for Traxxas 1/16 GTR Shocks. This includes aluminum black shock caps, spring adjusters, and spring retainers. These will replace the plastic cap, spring adjuster and retainer of the factory shocks...

This is the Traxxas Center Differential Kit for the 1/16 E-Revo, Slash, and Summit vehicles. OverviewThe optional center differential helps balance the E-Revo VXL’s power distribution to reduce front end lift on acceleration and improve steering...

This is the Traxxas Wheelie Bar for 1/16 E-Revo The patented Traxxas 1/16 scale adjustable wheelie bar features four position adjustment. The wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The...

This is the Traxxas Front Suspension Arm Set for use on the 1/16 E-Revo 4WD and 1/16 Summit trucks. Features: Nylon construction Black in color Includes:One Upper Right Suspension ArmOne Lower Right Suspension ArmOne Upper Left Suspension ArmOne Lower...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six 3x6mm...

These are the Pivot Balls and Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES Steel constructed pivot balls Black nylon pivot ball caps INCLUDESFour Pivot BallsFour Pivot Ball Caps REQUIRESInstallation on the...

This is the Hot Racing Hardened Steel 55-Tooth Spur Gear for Traxxas 1/16 Vehicles such as the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear-...

This is the Traxxas Steering Arm and Shock Mount Set for use on the 1/16 vehicles including the E-Revo, Slash, Summit, Mustang, Fiesta, and Rally vehicles.FEATURESNylon construction Black in...

This is the Hot Racing Aluminum Heat Sink Motor Mount for Traxxas 1/16 vehicles with 540 or 550 Motors, such as the 1/16 E-Revo, 1/16 Slash, 1/16 Rally, and 1/16 Summit.FEATURES:- CNC machined aluminum construction- Anodized black with red anodized...

This is the Traxxas Differential locker, (2). This is Traxxas part number 7381Part Number: 7381 / TRA7381Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

This is the Traxxas Spring, shock (nickel finish) (GTR) (2.925 rate, blue) (1 pair). This is Traxxas part number 7245APart Number: 7245A / TRA7245AFits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm...

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...

This is a pair of RPM Black Front Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo vehicles. These will work on both the brushed and VXL brushless versions.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started...

This is the Gen3 RC 8-Piece Rubber Sealed Wheel Bearing Kit for Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit Axle Carriers.Features Super durable black rubber seals offer excellent protection against the harshest elements Pre-lubricated...

These are the Hot Racing Aluminum Rear Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. They will work on the brushed and VXL brushless versions of these trucks.FEATURES:Black anodized colorConstructed of CNC machined 6061...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two mounted Left & Right Canyon AT tires with foamsTwo Geode...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid PlateTwo Steering Servo GuardsOne Steering Servo Cover...

This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES:Steel construction INCLUDES:16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES:Installing on motor shaft SPECS:Number of Teeth: 16TPitch: 48Inner Diameter: 0.12" (3mm)

This is the Hot Racing Hardened Steel 48-Tooth Spur Gear for Traxxas 1/16 vehicles like the 1/16 E-Revo, Slash, Summit, and Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear- Direct replacement for...

These are the Hot Racing 1/16 Progressive Springs (3 Pairs) for use with 1/16 Traxxas Shocks. These will fit shocks on vehicles like the 1/16 E-Revo, 1/16 Summit, 1/16 Slash, 1/16 Rally, and the Traxxas Funny Car.With Hot Racing progressive springs,...

These are the Front and Rear Body Mounts and Posts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.FeaturesNylon constructionBlack in colorIncludesOne Front Body MountOne Rear Body MountTwo Front Body PostsTwo Rear Body Posts

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Front Bulkhead for use on the Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURESNylon constructionBlack in color INCLUDES Two front bulkhead halves Four 3x10mm Button Head Screws One 2.5x23mm Cap Screw  REQUIRESInstallation over...

This is a set of Traxxas Center Front and Rear Half Shafts for the 1/16 Slash and E-Revo vehicles. FEATURES: Nylon construction Black in color INCLUDES:One Front Center Half ShaftOne Rear Center Half ShaftFour U-Joints

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Hot Racing Aluminum Servo Saver Steering Bellcrank for the Traxxas 1/16 Revo, 1/16 4x4 Slash, 1/16 Mustang, 1/16 Rally, and 1/16 Summit. This will fit the brushed and VXL brushless versions.FEATURES:- CNC machined aluminum construction-...

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles.FEATURES:- Aluminum construction with 2 spring loaded...

This is the Traxxas Tires and wheels, assembled, glued (Geode chrome, blue beadlock style wheels, Canyon AT tires, foam inserts) (1 left, 1 right). Dirt, mud, snow…no matter where you run your 1/16 Summit, you can count on it to dig in hard with...

This is the Traxxas Spring, shock (nickel finish) (GTR) (2.77 rate, pink) (1 pair). This is Traxxas part number 7244APart Number: 7244A / TRA7244AFits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas XL-2.5 Waterproof Electronic Speed Control (ESC) with Low-Voltage Detection (LVD), pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smooth throttle...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws

These are the Hot Racing Heavy Duty Aluminum Front or Rear Axle Carriers (AKA steering knuckles) for Traxxas 1/16 E-Revo, Slash 4x4, Summit, Grave Digger, Ford Fiesta, and Rally.NOTE: The disc brakes shown in photos are Hot Racing VXS21BR02 and VXS21BS02...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This gear is a brass pinion gear in 48 pitch Features:Brass pinion gear Includes:1 gear and 1 set screw Specs:Brass, 48 pitch, 18 tooth pinion gear.Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16"Shaft diameter- 1/4"  Gear...