Nitro Stampede

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch.Includes: One 4 cell AA Battery Holder w/Receiver Connector...

This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

This is a pair of Traxxas Pink Rear Springs for Stampede, Slash 2WD, Rustler, and many other vehicles. These fit the Traxxas XX-Long Ultra Shocks.Fits1/10 Monster Jam TrucksCraniacNitro SlashNitro StampedeRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD...

This is the MIP X-Duty Rear CVD Drive Kit for the 1/10 Slash 4x4, Stampede 4x4, Rally VXL, Stampede VXL 2WD and Rustler VXL 2WD, Nitro Stampede, and Nitro Rustler.Includes2 - MIP Confetti Sticker, 2.185 x .65 Black1 - MIP Lube & Thread Gel Cup1 - MIP...

This is a pair of the Traxxas Nitro Rear/Electric Front All Star Wheels and Anaconda Tires. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam inserts INCLUDES:One left and one right all-star wheels with anaconda...

This is the Traxxas Big Bore Shock Piston Head Set with Mounting Bushings. This set includes two 2-hole pistons, two 3-hole pistons, two shock mounting bushings, and two washers.Includes2- Pistons (2-hole)2- Pistons (3-hole)2- Shock Mounting Bushings2-...

This is a set of Traxxas Long Truck Half-Shafts for the Rustler, Stampede, and Slash 2WD vehicles. Includes:2 white nylon telescoping shaft (each shaft is made of two pieces)4 aluminum U-joints

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16...

This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. FEATURES Fiberglass...

This is the GPM Racing Blue Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

These are the Traxxas Collars with Set Screws. These come in packages of two.Includes:(2) screw collars(2) 3mm set screws Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeNitro...

This is the RPM Black Front Suspension A-Arm Set for the Electric Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport vehicles.RPM Rear A-arms for the Traxxas Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport are finally here to strengthen the...

This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. 31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel...

This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more.Fits:Bandit XL-5 & VXLRustler XL-5 & VXLStampede...

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.

This is the GPM Joint Rebuild Kit for SSLA1277RH & SSLA1280FH CVD Steel Driveshaft Sets.  Each pack rebuilds two joints. Includes Steel Pin 2x11.7 - 2pcsSpring Coil - 2pcsBlack Collar - 2pcs

These are GPM Replacement Screw Pins for SSLA1277 & SSLA1280 CVD Driveshaft Sets.  Each pack includes two screw pins.

This is a GPM Stainless Steel Replacement Stub Axle and CVD for SSLA1277RHA Driveshafts. *Joint replacement for GPM Racing #SSLA1277RHA only IncludesJoint - 1pcHex - 1pc3x3 Screw Shaft - 1pc

These are the GPM Racing Red Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

These are the GPM Racing Orange Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability...

These are the GPM Racing Gunmetal Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability...

These are the GPM Racing Green Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

These are the GPM Racing Black Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

These are the GPM Racing Blue Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

This is the GPM Racing Black Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

These are the Tekno M6 Driveshafts and Hub Carriers for Traxxas Slash 2WD XL-5 & VXL, Nitro Rustler, Nitro Stampede and  Stampede 2WD (Rear) trucks. This set will give your truck the ultimate in performance and durability. Features: Custom 6mm...

This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. This is Traxxas part number 1664. These are used in a large number of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacMonster JamNitro RustlerNitro...

This is a Traxxas 22-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is a Traxxas 18-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for...

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.  The front suspension arm hinge pins pass through this piece. FEATURES:Gray nylon construction INCLUDES:One front bulkhead REQUIRES:Nothing.  This is a direct replacement...

This is the GPM Racing Green Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is a pair of Assembled and Glued Rear Victory Tires and Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are direct replacments for the originals, and if you are running on tar or cement, you know how quickly tires can go. ...

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you would like to mount this in...

This is the GPM Racing Orange Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...

This is a Traxxas Shock Piston Head Set (2 sets of 3 types) with shock collars and lower spring retainers.Includes:2 - Lower spring retainers2 - Upper spring clamps2 each - Plastic 1 hole pistons, 2 hole pistons, and 3 hole pistons2 - 2.5mm x 9mm machine...

These are the Traxxas Rear Stub Axles for the Bandit, Stampede, Rustler, and Slash. Features: Metal construction, black and silver in color Includes: Two rear stub axles and pins Specifications:Length: 1.65" (42mm)Diameter: .51" (13mm) at...