Nitro 4-Tec

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

This is a set of four Traxxas Green Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

This is the Traxxas 2074 Servo Case and Gasket Set for 2056 and 2075 Waterproof Servos. Replacement Part For 4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOTBlastChevrolet Corvette StingrayDrag SlashE-Revo VXL BrushlessFactory Five...

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned High RPM Performance Pipe for the Jato 2.5 and 3.3 trucks.  This will also work on the Nitro Rustler and Nitro 4-Tec from Traxxas.  These provide a significant power increase...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm.These fit the Traxxas Big Bore aluminum shocks for the Slash 2WD, Slash 4x4, Rustler, Bandit, Stampede 2WD,...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

These are Shock Caps and Bottoms for Traxxas kits. Features: Nylon construction Includes:Two nylon shock cap (tops)Two nylon shock cap (bottoms) Specifications:Diameter:Tops: 16mmBottoms: 13mm

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is required INCLUDESSix...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the...

This are Rod Ends Short for the Nitro T-Maxx.  These rods ends attach to turnbuckles for front/rear. FEATURES:Black nylon rod endsSteel pivot balls INCLUDES:Six nylon rod endsSix pivot balls REQUIRES:Turnbuckles: TRA2338 SPECS:Length: .695" (17...

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.  If you need the entire fuel tank, search our store for TRA5363.

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new pistion and sleeve can restore lost power from wear on...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Traxxas Plastic Washers,Wht: ST, RU, BA(6)

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...

This is the Traxxas Bellcrank Bushing set for the Nitro Rustler, T-Maxx .15, 2.5, 3.3, Slayer, and other vehicles.