Nitro 4-Tec

This is a quart of Traxxas Top Fuel 20% Nitro Radio Controlled Car and Truck Engine Fuel. Traxxas Fuels are Perfectly Blended with high quality ingredients to give your Engine Easier Starts, Faster Runs, and longer life.This item ships only to the 48...

This is the Traxxas Super Duty Long Glowplug. FEATURES:Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 enginesSuited for the varied throttle range of off-road racingMedium heat range INCLUDES:One Traxxas Medium Heat Range Super Duty Long...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

This is the Traxxas Speed Bit Master Set Metric 7-Piece Straight and Ball End Hex Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:Premium handle (1/4" drive)Travel pouchStraight Hex Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mmBall End Hex...

This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and higher), iPhone (4S and newer), iPod touch (5th generation...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a pull-start such as this is a great way to cut some...

This is the Traxxas 1800mAh 7.2V 6-Cell NiMH Battery with Standard Tamiya Plug. This is used in Traxxas EZ-Start Systems with nitro vehicles. This works with the EZ-Start 1 and 2.

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLJatoNitro RustlerNitro SlashRustler 4X4 VXLRustler...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the 2056 servo found in some models.Specifications125 oz-in...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball screws18 hollow ball connectorsFits1/10 Monster Jam...

This is a Traxxas Glow Plug Wire Lead for all Traxxas EZ-Start 1 and 2 equipped vehicles.  It fits the T-Maxx .15, 2.5, 3.3, Revo, Jato, 4-Tec, Rustler, Stampede and all other vehicles equiped with the EZ-Start system.  It...

This is the Traxxas Fuel Line  (2 ft) SpecificationsFuel line (610mm or 2ft)24" fuel line Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-Maxx Accessory Part ForTRX 2.5RTRX 3.3TRX Pro .15

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides oil for many applications, and is still small enough to...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated construction SPECSOutside diameter:...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmFits1/10 E-Revo...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a package of replacement Traxxas 5x8mm Teflon Washers (20) for the Traxxas T-Maxx, Revo, Jato, and other vehicles. (use with ball bearings) FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.  1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.    Includes (1) Traxxas TQ 2.4GHz 3-Channel Transmitter Requires (4) AA batteries

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball Bearings Specifications:Inner Diameter: 10mmOuter Diameter: 15mmSide...

This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features White plastic construction Spring loaded Two...

This is a set of four Traxxas Blue Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas 1200mAh NiMH 5-Cell 6-Volt Hump Pack Receiver Battery for Traxxas Nitro vehicles.  This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200mAh.  Fully charged, it provides about 1 hour...

This is a set of two Traxxas 12mm Blue Aluminum Hex Wheel Hubs with Axle Pins. Not only are these aluminum hex wheel hubs as tough as nails, they’re blue-anodized to make your ride look even sharper! Traxxas machines them for the highest precision and...

This is the Traxxas Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Features: Blue silicone insulated wire with pre-installed connectors Includes:One glow plug wire leadOne...