1/16 Rally

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use with these vehicles and more!1/10 E-Revo Brushed1/10...

This is the Traxxas Front Suspension Arm Set for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Upper Right Suspension ArmOne Lower Right Suspension ArmOne Upper Left Suspension ArmOne Lower Left Suspension Arm

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16...

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

This is the Traxxas Velineon VXL-3m Brushless Power System for use in Traxxas 1/16 Scale vehicles. This will not fit 1/10 scale vehicles.This motor may require a different motor mount than stock if you currently have a vehicle with a 550 motor.The...

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES:Pinion gear with set screw, Silver in color INCLUDES:(1) 23 Tooth 48 Pitch Pinion Gear(1) One 4mmx2mm set screw REQUIRES:Installation SPECS:Outer Diameter: 14mm (9/16")Inner Diameter: 11mm...

This is the Hot Racing Blue Aluminum Shock Upgrade Kit for Traxxas 1/16 GTR Shocks. This includes aluminum black shock caps, spring adjusters, and spring retainers. These will replace the plastic cap, spring adjuster and retainer of the factory shocks...

This is the Traxxas Center Differential Kit for the 1/16 E-Revo, Slash, and Summit vehicles. OverviewThe optional center differential helps balance the E-Revo VXL’s power distribution to reduce front end lift on acceleration and improve steering...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six 3x6mm...

These are the Pivot Balls and Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES Steel constructed pivot balls Black nylon pivot ball caps INCLUDESFour Pivot BallsFour Pivot Ball Caps REQUIRESInstallation on the...

This is the Hot Racing Complete Front and Rear Adjustable Sway Bar Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will work on brushed and VXL brushless versions. Add this sway bar set to your vehicle for improved stability through...

This is the Hot Racing Hardened Steel 55-Tooth Spur Gear for Traxxas 1/16 Vehicles such as the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear-...

This is the Traxxas Steering Arm and Shock Mount Set for use on the 1/16 vehicles including the E-Revo, Slash, Summit, Mustang, Fiesta, and Rally vehicles.FEATURESNylon construction Black in...

This is the Hot Racing Aluminum Heat Sink Motor Mount for Traxxas 1/16 vehicles with 540 or 550 Motors, such as the 1/16 E-Revo, 1/16 Slash, 1/16 Rally, and 1/16 Summit.FEATURES:- CNC machined aluminum construction- Anodized black with red anodized...

This is the Traxxas Differential locker, (2). This is Traxxas part number 7381Part Number: 7381 / TRA7381Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

This is the Traxxas Complete Transmission for VXL Brushless 1/16 E-Revo and 1/16 Slash trucks. This comes pre-assembled with the spur gear and slipper clutch, making it a great option for quick replacement of a damaged transmission, or as a spare to have...

This is the Traxxas Complete Transmission for Brushed 1/16 E-Revo and 1/16 Slash trucks. This comes pre-assembled with the spur gear and slipper clutch, making it a great option for quick replacement of a damaged transmission, or as a spare to have on...

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...

This is the Gen3 RC 8-Piece Rubber Sealed Wheel Bearing Kit for Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit Axle Carriers.Features Super durable black rubber seals offer excellent protection against the harshest elements Pre-lubricated...

These are the Hot Racing Aluminum Rear Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. They will work on the brushed and VXL brushless versions of these trucks.FEATURES:Black anodized colorConstructed of CNC machined 6061...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid PlateTwo Steering Servo GuardsOne Steering Servo Cover...

This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES:Steel construction INCLUDES:16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES:Installing on motor shaft SPECS:Number of Teeth: 16TPitch: 48Inner Diameter: 0.12" (3mm)

This is the Hot Racing Hardened Steel 48-Tooth Spur Gear for Traxxas 1/16 vehicles like the 1/16 E-Revo, Slash, Summit, and Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear- Direct replacement for...

These are the Hot Racing 1/16 Progressive Springs (3 Pairs) for use with 1/16 Traxxas Shocks. These will fit shocks on vehicles like the 1/16 E-Revo, 1/16 Summit, 1/16 Slash, 1/16 Rally, and the Traxxas Funny Car.With Hot Racing progressive springs,...

These are the Front and Rear Body Mounts and Posts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.FeaturesNylon constructionBlack in colorIncludesOne Front Body MountOne Rear Body MountTwo Front Body PostsTwo Rear Body Posts

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Front Bulkhead for use on the Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURESNylon constructionBlack in color INCLUDES Two front bulkhead halves Four 3x10mm Button Head Screws One 2.5x23mm Cap Screw  REQUIRESInstallation over...

This is a set of Traxxas Center Front and Rear Half Shafts for the 1/16 Slash and E-Revo vehicles. FEATURES: Nylon construction Black in color INCLUDES:One Front Center Half ShaftOne Rear Center Half ShaftFour U-Joints

This is the Hot Racing Aluminum Servo Saver Steering Bellcrank for the Traxxas 1/16 Revo, 1/16 4x4 Slash, 1/16 Mustang, 1/16 Rally, and 1/16 Summit. This will fit the brushed and VXL brushless versions.FEATURES:- CNC machined aluminum construction-...

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles.FEATURES:- Aluminum construction with 2 spring loaded...

This is the Traxxas XL-2.5 Waterproof Electronic Speed Control (ESC) with Low-Voltage Detection (LVD), pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smooth throttle...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws

These are the Hot Racing Heavy Duty Aluminum Front or Rear Axle Carriers (AKA steering knuckles) for Traxxas 1/16 E-Revo, Slash 4x4, Summit, Grave Digger, Ford Fiesta, and Rally.NOTE: The disc brakes shown in photos are Hot Racing VXS21BR02 and VXS21BS02...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 26 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...

This gear is a brass pinion gear in 48 pitch Features:Brass pinion gear Includes:1 gear and 1 set screw Specs:Brass, 48 pitch, 18 tooth pinion gear.Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16"Shaft diameter- 1/4"  Gear...

This is the Hot Racing Aluminum Hard Anodized Red GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave Digger, and 1/16 Mustang. These replace Traxxas part...