Telluride

This is a package of replacement Traxxas 5x8mm Teflon Washers (20) for the Traxxas T-Maxx, Revo, Jato, and other vehicles. (use with ball bearings) FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES Black steel construction INCLUDESSix steel shoulder screws SPECSLength: 12mmDiameter: 3mm

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.  1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.    Includes (1) Traxxas TQ 2.4GHz 3-Channel Transmitter Requires (4) AA batteries

This is the Traxxas 7.2V 3000mAh NiMH Battery with iD Connector. This is stock replacement battery for the Traxxas Blast boat.Features:New high current connector with gold-plated copper terminalsiD Auto Battery Identification allows Traxxas iD equipped...

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry. Features Compatible with all Traxxas models that include the TQi telemetry systemMay also be used with all current Traxxas TQ 2.4GHz transmitters with black cases and satin chrome or...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is the Traxxas 5000mAh 7.4v 2-Cell 25C LiPo Battery (short/137mm). This new shorter design allows this 2S 5000mAh pack to fit in tighter compartments, making it a great option for Stampede 2WD, 4x4, Rustler, and Bandit vehicles.Fits1/10 E-Revo...

This is the Traxxas Power Tap Connector For the TQi Telemetry setups on electric vehiclesNote: If your speed controller has a iD High Current Connector you will need to change the plug to a 1st generation High Current Connector. Part number 3070.

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas Extended Battery Hold Down for the Stampede 4x4 trucks. It allows for the use of taller multi-cell battery packs.Includes: Battery hold down, metal post, body clip

These are the optional Traxxas Blue Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come in...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric and nitro vehicles.Fits Traxxas charger model 2974,...

This is the Traxxas 6-Cell 7.2V 4200mAh iD NiMH Battery Pack. This is a great way to extend the run-time on the Traxxas Blast boat. This can also be used in vehicles like the Slash, Rustler, Stampede, Bandit, and Telluride.FeaturesNew high current...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts. Use this splined wheel wrench for extra leverage on 17 mm hex nuts. Replacement Part ForE-Revo VXL BrushlessRevoTRX-4 Equipped with...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball Bearings Specifications:Inner Diameter: 10mmOuter Diameter: 15mmSide...

This is the Traxxas Front and Rear Adjustable Body Mount Post Set.Fits1/10 Monster Jam TrucksCraniacE-MaxxSkullySlash 2WD XL-5Stampede VXL 2WDStampede XL-5 2WDTelluride

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch set Specifications:Length: 1.98" (50mm)Diameter: .21" (5mm)

These are the Traxxas Red Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, Stampede 4x4, and Bandit series vehicles.Traxxas...

This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin, 4 mm locknut and 5 mm locknut. Fits: 5556 pressure...

This is a set of four Traxxas Blue Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature steel construction with nylon locking inserts.

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System.Includes: Mount, Plastic Tie, and Thermal Pad

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

These are the GPM Racing Blue Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for...

This is the Traxxas Velineon 3500 4-Pole Brushless Waterproof Motor. This is the replacement motor found in many of the 1/10 brushless trucks, designed for use with the VXL-3s ESC. See full list of compatible trucks below.The Velineon 3500 Brushless...

This is a set of two Traxxas 12mm Blue Aluminum Hex Wheel Hubs with Axle Pins. Not only are these aluminum hex wheel hubs as tough as nails, they’re blue-anodized to make your ride look even sharper! Traxxas machines them for the highest precision and...

This is the Traxxas Rear Center Drive Hub and Set Screw for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Telluride, and XO-1 vehicles. Replacement Part For1/10 Ford Fiesta ST Rally1/10 RallyRustler 4x4 Brushed XL-5Rustler 4x4 VXLSlash 4x4 Brushed...

These are the Traxxas 6061-T6 Orange Aluminum Steering Blocks for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and Rally vehicles. Accessory Part For 1/10 Ford Fiesta ST Rally1/10 RallyRustler 4x4 Brushed XL-5Rustler 4x4 VXLSlash 4x4 Brushed XL-5Slash 4x4...

These are the Traxxas 6061-T6 Orange Aluminum Caster Blocks for 4x4 Slash Stampede Rustler

This is the Traxxas Orange Aluminum Rear Stub Axle Carriers (2)

These are the Hot Racing Carbon Fiber Long Slipper Clutch Pads with 25% more surface area than stock pads, for use in place of Traxxas 5352 or 5552 pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash...

This is the Hot Racing Adjustable Front and Rear Sway Bar Kit for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- Adjustable spring steel sway bar wire- A set of three sway bars for a wider range of adjustment to suit the...

This is the GPM Racing Blue Aluminum Slipper Clutch Eliminator and Bearing Adapter for Traxxas 1/10 Slash 4x4, Stampede 4x4, 1/10 Rally, and Rustler 4x4 trucks. This part eliminates any power loss or slippage from the slipper clutch, giving you instant...

This is the Traxxas Slipper clutch - complete.  The slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard replacement for existing clutches, or as an upgrade for...

These are the Traxxas Flathead 3x8mm Hex Drive Screws. Features: Metal construction Black in color Includes: Six 3x8mm Flathead Hex Screws

These are the Traxxas Countersunk 4 x 12mm Screws. Features:Metal constructionBlack in color Includes: Six 4 x 12mm Countersunk Flathead Hex Screws