Slayer Pro 4x4

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a package of replacement Traxxas 5x8mm Teflon Washers (20) for the Traxxas T-Maxx, Revo, Jato, and other vehicles. (use with ball bearings) FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.  1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.    Includes (1) Traxxas TQ 2.4GHz 3-Channel Transmitter Requires (4) AA batteries

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry. Features Compatible with all Traxxas models that include the TQi telemetry systemMay also be used with all current Traxxas TQ 2.4GHz transmitters with black cases and satin chrome or...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is the Diff Oil Kit for the Revo by Traxxas. FEATURES:Three bottles of oil (10K,30K,50K weights). INCLUDES:Three 2oz (59ml) bottles of oilThree pour spouts

This is a Traxxas Revo 36-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is a package of three Traxxas Air Filter/Pre-Filter Foam Inserts for the Traxxas 3.3 racing engine.  This engine is used on vehicles such as the Revo, Jato, and T-Maxx. Features: Constructed of foam and pre-oiled to trap dirt Pre-Filter...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is a Traxxas Revo 38-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is a bottle of Traxxas 30K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for optimum performance.For use with these vehicles and more!1/10 E-Revo Brushed1/10 E-Revo...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric and nitro vehicles.Fits Traxxas charger model 2974,...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts. Use this splined wheel wrench for extra leverage on 17 mm hex nuts. Replacement Part ForE-Revo VXL BrushlessRevoTRX-4 Equipped with...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball Bearings Specifications:Inner Diameter: 10mmOuter Diameter: 15mmSide...

This is the Traxxas 1200mah 5-Cell NiMh flat receiver battery pack for use in the Traxxas Jato, Revo, and Slayer Pro trucks.  This 6-volt pack gives the servos power, speed, and will allow longer run-times than smaller packs.  This high...

This is a pair of Traxxas 6x13x5mm Rubber Sealed Ball Bearings for use on the Revo 3.3, 1/10 E-Revo, E-Maxx, Slayer, T-Maxx and X-Maxx trucks.FeaturesStainless Steel bearing constructionBlue rubber dirt shieldsIncludes: (2) 6x13x5mm ball...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature steel construction with nylon locking inserts.

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is a Traxxas High Stall Clutch Set for the Traxxas T-Maxx .15, 2.5, 3.3, Revo 2.5 and 3.3 trucks.  A higher stall lets you rev the engine up higher before the clutch engages, for more power when you are taking off.

This is the Traxxas Blue Exhaust Pipe Coupler and Exhaust Deflector with Cable Ties for mounting the muffler to the header, and the deflector to the tip of the muffler.Fits: Jato 2.5Jato 3.3Revo 3.3SlayerSlayer Pro

This is a Traxxas EZ-Start 2 Replacement Motor and Pinion Gear.  This is used on vehicles like the T-Maxx 2.5, 3.3, Revo 2.5, 3.3, Jato, Nitro 4-Tec, Nitro Rustler, Nitro Slash, Slayer Pro, and other vehicles using the 2.5 and 3.3 engines...

These are the Hot Racing Carbon Fiber Long Slipper Clutch Pads with 25% more surface area than stock pads, for use in place of Traxxas 5352 or 5552 pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash...

This is the Traxxas Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Features: Blue silicone insulated wire with pre-installed connectors Includes:One glow plug wire leadOne...

This is package of 24 Traxxas 1.5mm E-Clips. These are used across a large number of Traxxas vehicles to secure pins and other components.Includes: (24) 1.5mm e-clipsSpecificationsOutside diameter: .163" (4mm)Opening: .059" (1...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for Traxxas owners!

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease (volume unknown) REQUIRESApplication to parts needing...

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management (TSM) allows you to experience all the extreme power,...

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...

This is the GTR Shock Rebuild Kit by Traxxas. FEATURES:Shock rebuild parts INCLUDES:Four blue plastic shock pistonsTwo blue rubber diaphragmsFour black plastic shock endsTwo piston lock nutsFour metal X-rings COMMENTS:This set will rebuild two shocks

This is the Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3. FEATURES:Direct replacement part INCLUDES:One differential ring gearOne pinion gear REQUIRES:Traxxas Revo 3.32.5x8mm cap head screws (TRA3965)

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3.3SlayerT-Maxx 2.5 & 3.3

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into the optional TQi Telemetry Expander to provide...

This is a Traxxas Revo Big Block Installation Kit.  This fits the Revo 2.5 and 3.3.  This kit allows Revo owners the option of installing various .21-.28 size engines. The Revo big block installation kit makes it easy to...

This is a Traxxas Revo 40-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is the Traxxas Receiver Battery Wiring Harness with On/Off Switch and Charge Jack for the Revo and Slayer nitro trucks. This can be used with other nitro vehicles using rechargeable receiver batteries as well.

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12")

This is the Traxxas Differential Gear Set with diff output gears, spider gears, spider gear shaft, and diff carrier support. This fits 1/10 E-Revo, Revo 3.3, Summit, E-Maxx, T-Maxx, and Slayer trucks.IncludesTwo Output GearsTwo Spider GearsSpider Gear...