Nitro Stampede

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a package of replacement Traxxas 5x8mm Teflon Washers (20) for the Traxxas T-Maxx, Revo, Jato, and other vehicles. (use with ball bearings) FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet...

This is the Replacement 72 Spur Gear for the Traxxas Nitro Rustler and Nitro T-Maxx Trucks. FEATURES:Black plastic, slipper clutch style spur gear. INCLUDES:One 72 tooth spur gear REQUIRES:The other parts of that make up the slipper clutch are:#TRA1994 -...

This is the GPM Racing Green Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.  1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles.    Includes (1) Traxxas TQ 2.4GHz 3-Channel Transmitter Requires (4) AA batteries

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No...

This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

This is a Traxxas Front Bumper. This bumper fits many different vehicles, including the Stampede 2WD, Rustler, Bandit, and many nitro vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...

These are the Traxxas Hardened Steel Rear Driveshafts for the Traxxas 1/10 Scale Slash 4x4, Slash 2WD, Rally, and Stampede 4x4 vehicles.Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric and nitro vehicles.Fits Traxxas charger model 2974,...

This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features White plastic construction Spring loaded Two...

This is a set of four Traxxas Blue Aluminum Shock Caps for use on the Ultra Shock sets included on many Traxxas vehicles, such as the Bandit, Rustler, Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, T-Maxx, and many more. These shock caps are much...

This is the Traxxas Stock replacement EZ-Start Motor for the EZ-Start (original) System. This motor is what turns the engine over in order to start it.  This is for the original EZ-Start system, which was used on vehicles...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas 1200mAh NiMH 5-Cell 6-Volt Hump Pack Receiver Battery for Traxxas Nitro vehicles.  This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200mAh.  Fully charged, it provides about 1 hour...

This is the RPM Blue Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

This is a package of Traxxas Slipper Friction Pegs.  There are 12 pegs included.  These are for the vehicles using a spur gear and slipper clutch setup requiring these pegs.  These include the T-Maxx .15, 2.5, Nitro Rustler, Nitro...

This is the Traxxas Black HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede

This is the Traxxas Orange HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede

This is the Traxxas Red HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede

This is the Traxxas White HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede

This is the Traxxas Green HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede

This is the Traxxas Blue HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede

This is the Traxxas Orange Aluminum Rear Stub Axle Carriers (2)

This is the Traxxas Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Features: Blue silicone insulated wire with pre-installed connectors Includes:One glow plug wire leadOne...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles. FEATURES Black steel construction Screws are half-threaded/half-smooth Phillips head INCLUDESSix 3x12x5mm shoulder screws SPECSLength: 12mm (.47")Diameter: 3mm (.12")Thread...

This is the GPM Racing Black Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for Traxxas owners!

This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro RustlerRustler 4X4 VXLRustler 4X4Rustler VXLRustlerSlash 2WD...

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management (TSM) allows you to experience all the extreme power,...

This is a pair of RPM Chrome Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the...

This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting...

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...

This is the Traxxas 2-piece Receiver and Battery Hold Down Kit for the Stampede VXL OverviewIncludes battery hold-down (grey) (1), receiver hold-down (grey) (1), metal posts (2), spacers (2), body clips (2), servo tape, adhesive foam pad