This is the RPM Pit-Pro Extreme Car Stand for 1/10 and 1/8 Scale vehicles. Car stands have been around for a long time, with minimal innovation or ingenuity. That changes NOW! The all-new RPM Pit-Pro Extreme Car Stand is a completely new and unique stand that gives you versatility where none existed before. The RPM stand gives you greater access than traditional car stands like those by Duratrax.
Quick Features
- Rotates a full 360 degrees and tilts by as much as 45 degrees**
- Approximately 5″ (125mm) tall at full height
- Ultra wide, stable base sits over 11.875″ (302mm) wide
- 28 different mounting points on infinitely adjustable support arms
- Easily folds and disassembles to a compact 7-1/4 (184mm) x 5-1/2 (140mm) x 2-3/4 (70mm) for easy storage
- Impervious to most chemicals***
The Pit-Pro Extreme has numerous adjustability options to fit virtually any 1:12 - 1:8 scale chassis* and more. The infinitely adjustable support arms can sweep out to roughly 6.125 (155mm) all the way in to 2.125 (54mm). There are also 28 different mounting points for the support posts, giving you added versatility to make sure your ride sits exactly how you want it to sit on the stand.
Adjustability doesnt stop there! The adjustable support arms sit on top of a swivel platform that allows your vehicle to rotate a full 360 degrees and tilts by as much as 45 degrees**. Tilt angle is easily locked down with the included wing nut.
All this sits atop an ultra stable base, with four load-spreading legs that can be moved to any position required. With all four legs at their most stable position, they sit over 11.875 (302mm) wide, wider than nearly any other pit stand on the market. At full height, our stand is approximately 5 (125mm) tall.
All of this sounds like a huge car stand, and it is! However, the top easily slips off without any tools and the legs fold in for easy and compact storage. In its storage position, it is smaller than most other car stands currently available and can fit in a space as small as 7-1/4 (184mm) x 5-1/2 (140mm) x 2-3/4 (70mm).
The RPM Pit-Pro Extreme is sold with all necessary hardware and comes complete with 12 soft, self-adhesive, slip free pads for the legs and the adjustable arms to prevent your vehicle and Pit-Pro Extreme from moving from exactly where you put it.
The RPM Pit-Pro Extreme is molded from an extremely chemical resistant material so your motor sprays, cleaners, degreasers, etc. wont harm the stand***. Designed and manufactured in the USA!
Tech Notes:* Fits most flat or semi-flat chassis plates with or without center battery channels. May not work with a ladder or TVP style chassis.
** Angle of tilt varies by the weight and width of the vehicle and features installed. Tilt angle is higher with vehicle tires removed. Angle of tilt also limited by vehicle weight. We recommend offsetting the support arms towards the high side for higher tilt angles.
*** The Pit-Pro Extreme is impervious to most chemicals, but the small, non-slip pads have limited chemical resistance. Please use caution to prevent cleaners from attacking the pads.
